Cable Glands • Outdoor or indoor use. • For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour‘Y’ and steel tape armour‘Z’elastomer and plastic insulated cables. , • For particular use with:• Cables that exhibit ‘Cold Flow’ characteristics. 'G' Approx (Fully Compressed Length) Optional Metric Deluge Seal Entry Thread CABLE GLAND SELECTION TABLE Cable Acceptance Details Inner Sheath ‘A’ Outer Sheath ‘B’ Armour / Braid ‘C’ Min. 3.0 6.5 8.4 11.1 17.6 23.1 28.9 39.9 50.5 67.0 67.0 75.0 Diaphragm Seal Armour/Braid 'C' Across Flats Across Corners All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. G size and above are available in the 153/RAC design style. ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. • Deluge Protection to DTS01. • Operating Temperature Range: -60°C to +80°C. • Assembly Instruction Sheet: AI 372 (Sizes Os to F) and AI 303 (Sizes G to J). • Provides armour clamping using one clamping arrangement for all armour / braid types. • Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘Cold Flow’ characteristics. • Provides an outer deluge seal to prevent moisture ingress to the cable armour / braid. • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Alternative Reversible Armour Clamping Rings (RAC) Ordering Information Format for ordering is as follows: Alternate Seal (AR), add suffix AR to ordering information. Cable Gland Type 153/UNIV Cable Gland Type 153/UNIV