Cable Glands 153/X North American Cable Glands/Connectors 109 General Purpose 'G' Approx (Fully Compressed Length) Nickel Plated Hub Braid 'C' Application Entry Thread Size Size NPT Standard Ref. Metric * or Option Os O A B C C2 D E F H ½" ½" ½" or ¾" ¾" or 1" 1" or 1¼" 1¼" or 1½" 2" or 1½" 2½" or 2" 3" or 2½" 3½" or 3" M20² M20² M20 M25 M32 M40 M50 M63 M75 M90 Standard Seal Min. 0.12" 0.30" 0.44" 0.52" 0.75" 0.99" 1.24" 1.68" 2.15" 2.64" Ø 'B' Entry Thread Ø 'A' • Outdoor or indoor use. • For use with armoured marine shipboard jacketed or non-jacketed cable. • See technical section for installation rules and regulations. CABLE GLAND SELECTION TABLE Cable Acceptance Details Alternative Seal (S) Outer Jacket ‘B’ Max. 0.31" 0.46" 0.56" 0.79" 1.04" 1.27" 1.74" / 1.67" ¹ 2.21" / 2.14" ¹ 2.67" / 2.57" ¹ 3.06" Min. 0.34" 0.38" 0.61" 0.87" 1.09" 1.54" 1.91" - Max. 0.52" 0.60" 0.83" 1.10" 1.37" 1.83" 2.29" - Min. 0.22" 0.37" 0.49" 0.66" 0.87" 1.10" 1.42" 1.81" 2.24" 2.96" Max. 0.47" 0.63" 0.81" 1.02" 1.30" 1.61" 2.07" 2.57" 3.07" 3.52" Hexagon Dimensions 'G' Across Flats Across Corners 2.04" 2.04" 2.08" 2.74" 2.52" 2.69" 3.11" 3.10" 3.29" 4.80" 0.94" 0.94" 1.18" 1.42" 1.81" 2.17" 2.56" 3.15" 3.74" 4.53" 1.04" 1.04" 1.28" 1.55" 1.98" 2.38" 2.78" 3.46" 4.09" 5.23" Braid ‘C’ 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" 0.008" / 0.013" All dimensions in inches (except * where dimensions are in millimetres). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43” ³ UL approved only. Technical Data • • • • • • • • Features UL Listed for use Wet Locations. UL Listing No: E218332. Construction and Test Standards: UL 514B. Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. Deluge Protection to DTS01. Operating Temperature Range: -50°C to +60°C. Assembly Instruction Sheet: AI 341. Alternative certification options available: DNV Marine Approval ABS Marine Approval • Provides armour clamping for marine shipboard cable. • Provides a seal on the cables inner jacket. • Provides an outer deluge seal to prevent moisture ingress to the • • • cable armour and enclosure. Deluge seal is coloured black to indicate General Purpose product. Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket. Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information. Cable Gland / Connector Type 153 Size Thread (OPTIONAL) CX M32 S Cable Gland / Connector Type 153 Size Thread (OPTIONAL) CX 1"NPT S Connection Solutions HPG01 UPD 090610 www.ehawke.com