Cable Glands 151/RAC Industrial 119 15.0mm 'G' Approx (Fully Compressed Length) Armour/Braid 'C' Metric Entry Application Ø 'B' armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. Ø 'A' Entry Thread • Outdoor or indoor use. • For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip CABLE GLAND SELECTION TABLE Entry Thread Size Size Ref. Metric Os O A B C C2 D E F G H J M20² M20² M20 M25 M32 M40 M50 M63 M75 M80 M90 M100 Hexagon Dimensions Cable Acceptance Details Inner NPT * Standard Sheath ‘A’ or Option Max. ½" 8.0 ½" 11.9 ¾" or ½" 14.3 1" or ¾" 20.2 1¼" or 1" 26.5 1½" or 1¼" 32.5 2" or 1½" 44.4 / 42.3¹ 2½" or 2" 56.3 / 54.3¹ 3" or 2½" 68.2 / 65.3¹ 3½" 72.0 3½" 80.0 4" 90.0 Outer Sheath ‘B’ Min. 5.5 9.5 12.5 16.9 22.0 28.0 36.0 46.0 57.0 75.0 75.0 88.0 'G' Armour / Braid ‘C’ Max. 12.0 16.0 20.5 26.0 33.0 41.0 52.6 65.3 78.0 89.5 89.5 104.5 Orientation 1 0.8 / 1.25 0.8 / 1.25 0.8 / 1.25 1.25 / 1.6 1.6 / 2.0 1.6 / 2.0 1.8 / 2.5 1.8 / 2.5 1.8 / 2.5 2.0 / 3.5 2.0 / 3.5 2.5 / 4.0 Orientation 2 0.0 / 0.8 0.0 / 0.8 0.0 / 0.8 0.0 / 0.7 0.0 / 0.7 0.0 / 0.7 0.0 / 1.0 0.0 / 1.0 0.0 / 1.0 0.0 / 1.0 0.0 / 1.0 0.0 / 1.0 52.0 52.0 53.0 69.5 64.0 68.3 79.0 78.9 83.7 95.6 95.6 95.6 Across Flats Across Corners 24.0 24.0 30.0 36.0 46.0 55.0 65.0 80.0 95.0 106.4 115.0 127.0 26.5 26.5 32.5 39.5 50.5 60.6 70.8 88.0 104.0 115.0 130.0 142.0 All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm Features Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type CW, CX, CY and CZ. • Ingress Protection: IP66 to IEC/EN 60529. • Deluge Protection to DTS01 (Deluge Seal Optional). • Operating Temperature Range: -60°C to +100°C. • Assembly Instruction Sheet: AI 393. • Provides armour clamping using one clamping arrangement for all armour / braid types. • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Alternative Reversible Armour Clamping Rings (RAC) Size Ref. B C C2 D E F SELECTION TABLE Steel Wire Armour / Braid / Tape Orientation 1 Orientation 2 0.9 - 1.25 0.5 - 0.9 1.2 - 1.6 0.6 - 1.2 1.2 - 1.6 0.6 - 1.2 1.45 - 1.8 1.0 - 1.45 1.45 - 1.8 1.0 - 1.45 1.45 - 1.8 1.0 - 1.45 Ordering Information Format for ordering is as follows: Alternative Clamping Ring (AR), add suffix AR to ordering information. Cable Gland Type 151/RAC Size C Thread M32 (OPTIONAL) AR Cable Gland Type 151/RAC Size C Thread 1 1⁄4"NPT (OPTIONAL) AR Connection Solutions HPG01 UPD 090610 www.ehawke.com