Cable Glands 15.0mm 'G' Approx (Fully Compressed Length) Armour/Braid 'C' • Indoor use. • For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip Entry Thread Metric Entry armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. CABLE GLAND SELECTION TABLE Hexagon Dimensions Cable Acceptance Details Entry Thread Size Inner Sheath ‘A’ Across Flats Across Corners All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type BW, BX, BY and BZ. • Operating Temperature Range: -60°C to +100°C. • Assembly Instruction Sheet: AI 325. • Provides armour clamping using one clamping arrangement for all armour / braid types. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Alternative Reversible Armour Clamping Rings (RAC) Ordering Information Format for ordering is as follows: Alternative Clamping Ring (AR), add suffix AR to ordering information. Cable Gland Type 150/RAC Cable Gland Type 150/RAC Connection Solutions www.ehawke.com