123 Cable Glands Industrial 114 15.0mm 'G' Approx (Fully Compressed Length) Metric Entry Ø 'B' Entry Thread Application • Outdoor or indoor use. • For use with non-armoured elastomer and plastic insulated cables. • May be used on cables incorporating inner and outer cable sheath at two independent sealing points. Entry Thread Size Size Ref. Os O A B C C2 D E F G H J Metric M20² M20² M20 M25 M32 M40 M50 M63 M75 M80 M90 M100 NPT * Standard or Option ½" ½" ¾" or ½" 1" or ¾" 1¼" or 1" 1½" or 1¼" 2" or 1½" 2½" or 2" 3" or 2½" 3½" 3½" 4" CABLE GLAND SELECTION TABLE Cable Acceptance Details Outer Sheath ‘B’ Standard Seal Alternative Seal (S) Min. Max. Min. Max. 3.0 8.0 7.5 11.9 11.0 14.3 8.5 13.4 13.0 20.2 9.5 15.4 19.0 26.5 15.5 21.2 25.0 32.5 22.0 28.0 31.5 44.4 / 42.3¹ 27.5 34.8 42.5 56.3 / 54.3¹ 39.0 46.5 54.5 68.2 / 65.3¹ 48.5 58.3 67.0 73.0 67.0 77.6 75.0 91.6 - Hexagon Dimensions 'G' Across Flats Across Corners 40.0 40.0 40.4 44.3 47.2 49.5 72.5 64.8 68.0 68.0 68.0 68.0 24.0 24.0 30.0 36.0 46.0 55.0 65.0 80.0 95.0 106.4 115.0 127.0 26.5 26.5 32.5 39.5 50.5 60.6 70.8 88.0 104.0 115.0 130.0 142.0 All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type A2. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. • Deluge Protection to DTS01. • Operating Temperature Range: -60°C to +100°C. • Assembly Instruction Sheet: AI 398. Features • Provides a cable retention seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information. Cable Gland Type 123 Size C Thread M32 (OPTIONAL) S Cable Gland Type 123 Size C Thread 1 1⁄4"NPT (OPTIONAL) S Connection Solutions www.ehawke.com HPG01 UPD 090610