ProduC t infoR M ATION UniLug 405 Clamping system for closed rims Product description The UniLug is a well suited clamping system for car rims, light truck rims and particularly for French cars with closed rims (rims without a center hole). It is a good universal clamping device that can be set up relatively fast through adjusting the crossbeam to switch between 3-/4-/5-hole rims. Optimal setup is guaranteed with the use of the supplied bolt gage. The large range of bolt sizes (up to 215 mm) makes this clamping device versatile. The UniLug has a very high centering precision thanks to the precisely shaped crossbeam and polished surfaces. UniLug is available for machines with a cylindrical, conical or pneumatic connector. Internal adaptor ring to suit the relevant wheel balancer These centering rings are screwed onto the internal adaptor rings via a fine pitch thread Product features • UniLug is for closed rims • Universal clamping device for 3-, 4- and 5-hole rims • With adaptor ring for different machine types HAWEKA AG · Kokenhorststr. 4 · 30938 Burgwedel · Germany · Tel.:+49 5139 8996-0 · Fax: +49 5139 8996-222 · [email protected] · www.

ProduC t infoR M ATION Product overview UniLug 405 Adaptor ring 3 Centering rings (ø 58, 60, 65 mm) Part No. 405 xxx 108 xxx = Shaft diameter of balancing machine 280 = Mondolfo, Balco, Snap On, US market 360 = Cemb, Ravaglioli 380 = Corghi, Faip, Sice, HPA 400 = TipTop, Cemb, Ravaglioli, Cormach, Bright, US market, Hunter 9200, Mondolfo from 2005/2006 401 = Corghi, HPA, Teco, Mondolfo from 2007 009 = need a clamping chuck, e.g. cylindrical shafts 818 = Beissbarth, Sicam, Facom, Hofmann, Schenck / Nussbaum / ATT For balancing machines with conical shaft Optional accessories Set of fixcones: Part...