Mini hydraulic power pack type A Product documentation operating pressure pmax: effective volume (tank):

© by HAWE Hydraulik SE. The reproduction and distribution of this document as well as the use and communication of its contents to others without explicit authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of patent or utility model applications. Brand names, product names and trademarks are not specifically indicated. In particular with regard to registered and protected names and trademarks, usage is subject to legal provisions. HAWE Hydraulik respects these legal provisions in all cases. HAWE Hydraulik cannot provide individual...

Overview of mini hydraulic power pack type A Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic uid. The mini hydraulic power pack type A is characterised by its modular design. An external gear pump is ange-mounted onto the equipment rack in the hydraulic power pack. The oil tank is a round, plastic tank with an M14x1.5 lling screw. Version A 100 comes with a choice...

Available versions Circuit symbol Lifting version (H) Throttle * Lowering valve * 1: Lowering valve 2/2-poppet bypass valve 24 V (DC) = SP32 CMD 2: Lowering valve 2/2-poppet bypass valve 12 V (DC) = SP32 CME * Throttle valve and lowering valve required for version H; not available for version Q 2.5 "Motor" 2.4 "Pump" 2.3 "Tank size" 2.2 "design" 2.1 "Basic type and size"

2.1 Basic type and size Type exclusively with DC motor Lifting version, with direct current One ow direction, with direct current One ow direction, with direct current or alternating current 2.3 Tank size Coding Usable volume (l) horizontal Usable volume (l) vertical 2.4 Pump Miniature external gear pump Coding

Nominal voltage For A4D and B2D: Combination with tank size 1 not possible.

3.1 General data Installation position Horizontal or vertical (tank on top) Firmly screwed, 2 x M6 on the equipment rack preferably elastic suspension Pump design External gear pump Noise level (distance 1 m, decoupled attachment) Hydraulic uid Hydraulic uid, according to DIN 51 524 Parts 1 to 3; ISO VG 10 to 68 according to DIN ISO 3448 Viscosity range: 10 - 500 mm2/s Other media on request Cleanliness level Environment: approx. -15 to +80 °C, hydraulic uid: +10 to +40 °C Environment: approx. -30 to +80 °C, hydraulic uid: -15 to +80 °C Pay attention to the viscosity range Service life 10...

3.3 Pressure and volumetric ow max. Operating pressure Filter retention rate 3.4 Electrical data Motor C2D Voltage Nominal power Duty cycle Electrical connection Protection class Terminal assignment Temperature measurement Rotation direction of the motor shaft: left (looking at the shaft) Characteristic line Sp operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

rated otput duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection protection class Terminal assignment Rotation direction of the motor shaft: left (looking at the shaft) Characteristic line pump A, C, E Sp operating pressure (bar); Q delivery ow (lpm); I current consumption (A) HAWE Hydra

Nominal power duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection protection class Terminal assignment Rotation direction of the motor shaft: left (looking at the shaft) 1 2 Characteristic line pump A, B, C Sp operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

Nominal power duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection protection class Terminal assignment Rotation direction of the motor shaft: left (looking at the shaft) 1 2 Characteristic line pump A, B, C, D Sp operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

Nominal power duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection cables with ferrules protection class Terminal assignment Rotation direction of the motor shaft: left (looking at the shaft) 1 2 3 4 brown black blue yellow/green Characteristic line pump A, B Sp operating pressure (bar); Q delivery ow (lpm)

rated output duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection 1 x M6 and 1 x M8 for eyelet, 1 x 6.3 x 0.8 for at push-in receptacle protection class Terminal assignment Rotation direction of the motor shaft: left (looking at the shaft) 1 2 Characteristic line pump X, D, E Sp operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

All dimensions in mm, subject to change. A 065 - Q ... C2D Coding Tank size

hydraulic connections P and T: 2x M10x1 or ange port Coding Tank size

Coding Tank size

hydraulic connections P and T: 2x M10x1 or ange port Coding Tank size

hydraulic connections P and T: 2x M10x1 or ange port Coding Tank size Coding Motor

hydraulic connections P and T: 2x M10x1 or ange port Coding Tank size

Coding Tank size

Installation, operation and maintenance information DAMAGE Reference to other document Assembly instructions for mini hydraulic power pack type A: B 6025 Available for this product: assembly instructions with notes on ■ ■ ■ intended use, operating and maintenance, Assembly information HAWE Hydraulik

HAWE Micro Fluid GmbH Borsigstraße 11 | 93092 Barbing | Germany Phone +49 89 379100-6000 | [email protected] | www.hawe.com hawe.com/contact