HR 080
1 / 17Pages

Mini hydraulic power pack type HR 080 Product documentation Operating pressure pmax: Effective volume (tank):

© by HAWE Hydraulik SE. The reproduction and distribution of this document as well as the use and communication of its contents to others without explicit authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of patent or utility model applications. Brand names, product names and trademarks are not specifically indicated. In particular with regard to registered and protected names and trademarks, usage is subject to legal provisions. HAWE Hydraulik respects these legal provisions in all cases. HAWE Hydraulik cannot provide...

Overview of the mini hydraulic power pack type HR 080 Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic uid. The mini hydraulic power packs of type HR offer reversible direction of ow, achieved by reversing the direction of rotation of the motor. No directional valve is required. The motor is protected from overloads by a built-in temperature switch. Features and...

Available versions Circuit symbol -1/8 2.6 "Single connection block" 2.5 "Pressure setting A-side and B-side" Coating 2.4 "Ingress protection class " Tank Plastic tank Installation position 2.3 "Tank size" 2.2 "Motor" 2.1 "total ow rate" Direction of ow reversible, with double unblocking check valve GRV Basic type and size

2.1 total ow rate Radial piston pump coding Supply voltage alternating current motor 2.3 Tank size coding Plastic tank 2.4 Ingress protection class coding ingress protection class 2.5 Pressure setting A-side and B-side Coding Operating pressure pmin – pmax (bar) (Stated in 10 bar steps; tolerance + 10 bar) HAWE Hydr

2.6 Single connection block coding Circuit symbol Without coding

3.1 General data Attachment with and without single connection block Pump design Radial piston pump Hydraulic uid Hydraulic uid, according to DIN 51 524 Parts 1 to 3; ISO VG 10 to 68 according to DIN ISO 3448 Viscosity range: 10 - 500 mm2/s Cleanliness level Environment: approx. -15 to +40 °C, hydraulic uid: -10 ... +70 °C, ensure the correct viscosity range. 3.3 Pressure and volumetric ow Tank pressure Reux quantity Operating pressure

3.4 Electrical data 3.4.1 Motor 12 V DC Voltage Nominal power Duty cycle Electrical connection Plug AMP P/N 160786/2 housing AMP P/N 180908-5 (black) Protection class at +25 °C temperature of the hydraulic uid, viscosity 46 mm²/s, tolerance ±5 %; min p operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

Nominal power Duty cycle Electrical connection Plug AMP P/N 160786/2 housing AMP P/N 180908-5 (black) Protection class Terminal assignment Anti-clockwise rotation = ow at A and return at B Clockwise rotation = ow at B and return at A at +25 °C temperature of the hydraulic uid, viscosity 46 mm²/s, tolerance *5 % p operating pressure (bar); Q delivery ow (lpm); I current consumption (A)

Nominal power Rotation speed Current consumption Start-up current: max. 4 A Nominal current: max. 1.6 A Duty cycle Overload protection Temperature switch opens at 140 °C Electrical connection Cable with wire end ferrules Protection class Terminal assignment Thermal protection of windings 140° - internally wired Anti-clockwise rotation = ow at A and return at B Clockwise rotation = ow at B and return at A at +25 °C temperature of the hydraulic uid, viscosity 46 mm²/s, tolerance *5 % p operating pressure (bar); Q delivery ow (lpm)

3.4.4 Motor 230 V and 400 V AC, 3-phase Voltage / current consumption Nominal power Rotation speed Duty cycle Overload protection Temperature switch opens at 160 °C Electrical connection Cable with wire end ferrules Protection class Terminal assignment 230 V AC / Change of rotating direction: Exchange the L2 connection with L3, TW = Thermal protection of windings 160° Anti-clockwise rotation = ow at A and return at B Clockwise rotation = ow at B and return at A

Terminal assignment 230 V AC ! / 400 V AC ! Change of rotating direction: Exchange the L2 connection with L3, TW = Thermal protection of windings 160° Anti-clockwise rotation = ow at A and return at B Clockwise rotation = ow at B and return at A at +25 °C temperature of the hydraulic uid, viscosity 46 mm²/s, tolerance *5 % p operating pressure (bar); Q delivery ow (lpm)

All dimensions in mm, subject to change. With single connection block

Without single connection block

Installation, operation and maintenance information Observe the document B 5488 “General operating instructions for assembly, commissioning, and maintenance.”

References Additional versions ■ Mini hydraulic power pack type HR 050: D 6014 ■ Mini hydraulic power pack type HR 120: D 6343 Use ■ Oil recommendations: D 5488/1 ■ General operating manual for the assembly, initial operation and maintenance of hydraulic components and systems: B 5488 HAWE Hydraulik SE Einsteinring 17 | 85609 Aschheim/Munich | P.O. Box 11 55 | 85605 Aschheim | Germany Phone +49 89 379100-1000 | info@hawe.de | www.hawe.com hawe.com/c