Catalogs >
HAWE Hydraulik SE >
Efficiency from the modular system

Efficiency from the modular system
1 / 2Pages

Catalog excerpts

Efficiency from the modular system Hydraulics are based on a simple principle: using fluid pressure media, power is transmitted and motion generated. This principle can be transferred to a broad range of applications. The product range in the modular system – the result of the consistent development philosophy of HAWE Hydraulik – enables the creation of tailor-made solutions and systems. Standardised components and individual combination options ensure increased efficiency at the optimum cost-benefit ratio.  Various components complement each other to form a complete product range Enables solutions tailor-made to the customer Compact hydraulic power packs Type NPC for compact controllers with 5...10% operating time (Pmax = 700 bar, Qmax = 2.1 lpm) e.g. NPC 11 K/0,31 Type HC, HCW, KA, KAW for compact controllers with 10...30% operating time (Pmax = 700 bar, Qmax = 20.1 lpm) in 4 sizes, also as dual-circuit pump e.g. HC 14/2,0 KA 24 SKS/0,36 Type MP, MPN, MPW, MPNW for controls in standby mode or Shared connection load/no load operation (Pmax = 700 bar, Qmax = 15 lpm) in 5 sizes, also as dual-circuit pump, tank size can be selected Type HK, HKF, HKL for compact controls also in continuous operation (Pmax = 700 bar, Qmax = 16 lpm) in 3 sizes, also as dual and triple-circuit pump

Open the catalog to page 1

Compact hydraulic power packs Connection blocks Directly mounted valve banks The practical modular system enables completely individual combinations. Connection blocks Directly mounted valve bank Connection diagram for pipe connection or fitting of a directional control valve bank e.g BVZP1F23-G52/22-N14H15/0-1-1G24

Open the catalog to page 2