Power pack Multistat Plus The high-voltage power pack Multitstat Plus with its long permissible connected length and extended monitoring facilities is a high-performance unit. The Multistat Plus is particularly suited to systems with multiple ionizing bars. The extended functions of the Multistat Plus allow improved monitoring of the ionizing system set-up with this unit. The unit has 6 individually monitored high-voltage sockets. Any overload is indicated by means of a warning lamp and a signal at the signalling socket. Multistat Plus All HAUG ionizing units can be connected using the X-2000 high-voltage connector system. The most appropriate HAUG ionizing units can therefore be used depending on the fitting dimensions, the required output and the application conditions. ill.3 Control Overload lamp: indicates an overload at the HV connections. Reset: in the event of failure, the unit will switch off – restart using Reset. HV kV / HV mA: voltage of current indication on display Display The display indicates the high-voltage or currents at the 6 highvoltage connections. The currents are output one after another in a fixed sequence. This allows good monitoring of the ionizing units connected to the HV sockets. www.haug.de E-mail: [email protected] www.haug-ionisation.com E-mail: [email protected] Static Line - Power pack Multistat Plus HAUG Ionization – for the elimination of electrostatic charge

Technical data Multistat Plus Contact assignment signalling socket Signal output overload. In the event of overload, a signal (approx. 12 V) is output. Signal output, voltage values for current monitoring of HV sockets. Protection type: Protection class: Input reset signal. After the unit has switched off following an overload, it can be restarted by means of this input. Floating contact. Contact closed when high voltage is correct. Multistat Plus Multistat Plus (115 V) Multistat Plus (230 V) Floating contact. Contact closed when high voltage is correct. Nominal input voltage: Power input: Nominal...