*mydirectindustry

CANbridge

Product catalog summary

Product Overview:
The CANbridge is a fully-transparent CAN-bridge designed for easy and fast installation with plug-and-play functionality. It features a single CAN-interface and acts as a CAN-Bus router, supporting both standard and extended identifiers. The device serves as a cable replacement for uncomplicated handling and setup, offering bidirectional CAN-message transmission. Multiple systems can operate simultaneously, and it supports up to two M12 connectors.

Technical Specifications:

Temperature Range: -20° to +80°C
Protection Type: IP 65, with higher protection available upon request
Housing: Aluminum profile with PA end caps
Interface: CAN-Bus
Protocol Compatibility: CAN-specification 2.0B, supporting 11-Bit and 29-Bit identifiers
Data Rate: Up to 500 kbit/s
Technology: Transceiver (bidirectional, half-duplex)
Frequency: 2.4 GHz ISM band (2.402-2.480 GHz utilized), UWB 3.1-10.6 GHz (802.15.4 compliant)
Output Power: Adjustable up to 10 mW
Range: Dependent on installation and environment
Supply Voltage: 6 to 36 V DC (automotive battery)
Power Consumption: 80 mA @ 12 V DC
Weight: 170 g without antenna and cable
Size: 7.5 x 6.0 x 2.1/3.0 x 2.4 x 0.8 inch (length x width x height)

Additional Information:
Technical data is subject to change without notice. For more information, contact HATOX GmbH at Von-Drais-Str. 9, 75217 Birkenfeld, or via phone at +49 (0)7231 13323-0, or email at [email protected]. Visit their website at www.hatox.com.

Catalog excerpts

CANbridge • Fully-transparent CAN-bridge • Plug-and-play for easy and fast installation • Implements a CAN-Bus router • Standard identifier or extended identifier possible • Cable replacement for uncomplicated handling and setting up • CAN-protocol independent • Bidirectional CAN-message transmission • Several systems can be operated at the same time Technical data is subject to change without notice HATOX GmbH | Von-Drais-Str. 9 | 75217 Birkenfeld | Fon +49 (0)7231 13323-0 | E-Mail [email protected]

Open the catalog to page 1

General technical data Temperature range Aluminum profile with PA end caps Compatible with CAN-specification 2.0B (11-Bit und 29-Bit identifier supported) Data rate Transceiver (bidirectional, half-duplex) 2,4 GHz ISM band (2,402-2,480 GHz utilized), UWB 3,1-10,6 GHz (802.15.4 compliant) Output power Depending on installation and environment Supply voltage Power consumption 170 g without antenna and cable 7.5 x 6.0 x 2.1/3.0 x 2.4 x 0.8 inch (length x width x height) Technical data is subject to change without notice HATOX GmbH | Von-Drais-Str. 9 | 75217 Birkenfeld | Fon +49 (0)7231 13323-0 |...

Open the catalog to page 2

CANbridge

CANbridge

Catalog excerpts

All Hatox GmbH catalogs and technical brochures