HIGH PRESSURE FILLS FROM MEDIUM PRESSURE SYSTEM - Provides 2,500 psi up to 4,400 psi scuba tank fills to satisfy the busiest dive shop. - Boosts medium pressure storage air straight into dive tanks to requested higher pressures rapidly. MEDIUM PRESSURE COMPRESSOR SYSTEM BENEFITS: - Cooler operation to extend time between overhauls by thousands of hours regardless of compressor nameplate rating. - Lower cost storage cylinders, purifier units, compressors, motors and piping. With a Model 28153 ScubAmp, existing air compressor systems can stay within their 2,000-2,500 psi. New systems can be set back to medium pressure. T FROM PRESSURE IN STORAGE (AFTER EQUALIZING IN DIVE TANK) ONLY 2 SIMPLE CONNECTIONS NEEDED: 37° MALE FLARE, 9/16-18 THREAD FOR 3/8" O.D. TUBE (MAY BE REDUCED TO 1/4"). ALTERNATE AIR DRIVE: 1/2" NPT. SIZE 15'X 15'X 20 WEIGHT: 50 lbs. (Approx.) Positive maximum pressure setting adjustment 700 to 5,000 psi range with independent safety relief valve ScubaAmp Breathing Air Amplfier

SPECIFICATIONS - BOOSTER: Sir driven, balanced opposed double acting piston type. - HIGH PRESSURE SECTION : Non-Lube, contaminant free, triple sealed and ventedfrom air drive section. Materials: Stainless steel. - DRIVE SECTION: Silicone lubed at assembly, corrosion resistant, exhaust muffler. - STANDARD CONTROLS: All pneumatic. Automoatic stop at adjusted maximumn pressure, plus independent manual stop, valve and high pressure safety relief valve. Optional controls (extra cost):Remote on-off: automoatic start after equalizing. - GAUGES: Input pressure (from storage): 0 - 3000 psi. Drive Pressure:...