Catalogs >
Haskel >
Refrigerant Pumps

Refrigerant Pumps
2Pages

Catalog excerpts

Refrigerant PumpsAir Driven Positive-Displacement Piston Pumps With plenty leverage to condensate the common refrigerant without a condenser, these high-pressure pumps efficiently pump the liquid first, then the vapor, then vacuum to 23”-27” HG - with one pump. Their flexibility enables users to speed completely variable from zero to maximum lbs (kg)/ minute, stall against load, start against load and run dry, with no need for unloaders or bypass valving. Applications Designed for recovery or recharge of refrigerants. Haskel refrigerant pumps are safe, proven reliable and energy saving for recovery or recharge of fluids, regardless of phase - liquid or gas. Features and Benefits • Flexibility - Add gages and hoses to suit your application • Cool Operation - No heat generated during liquid transfer. Minor warming during vapor transfer. No refrigerant heating from the motor • Safety - Pneumatically driven. Operates from an air hose like an air tool. No electrical hazard. • Portability - An integral pump with linear air motor assembly weighing from 13 lbs (6kg) to 24 lbs (11kg). • Clean - No lubrication required in the gas section. Nothing is added to the refrigerant, liquid or vapor • ATEX certified version available © 2016 Haskel. All Rights Reserved www.haskel.com

Open the catalog to page 1

Approximate Performance Capability Model 59015 59025 Vapor with constant output resistance of 15 psi and inlet falling from 250 psi and inlet falling from 15 psi (1 bar) 50 psi (3 bar) 0 psi 80 psi 0 psi 27” HG 8 80 psi 823” HG Averages 1.4 scfm Averages .11 scfm Averages 1.5 scfm Averages .11 scfm Averages 1.5 scfm Averages .15 scfm Averages 1.6 scfm Averages .14 scfm 1. Air Drive Input: Data assumes approximately 100 psi (7 bar) at 40 scfm (1.132 Nm3/min) (10 HP compressor. Smaller air drive compressors will produce proportionally lower output rates (e.g. If air source is a 1 HP, 100 psi...

Open the catalog to page 2