The Mini Gas Charging System is designed and manufactured to achieve an affordable and effective gas transfer and charging unit. '' Mounting bracket included, (except for oxygen use) ' Bottle and cart not included. The system may be used but is not limited to the following applications: N2 Shock Absorber Charging, Accumulator Charging, Gas Transfer, Gauge Calibration, Pressure Testing and Purging. Haskel International, Inc. 100 East Graham Place, Burbank, CA 91502 U.S.A. PH: 818 843-4000 • FAX: 818 841-4291 • EMAIL: [email protected] Aircraft Ground Support (Military and Commercial) Industrial Gas Charging Applications Adjustable Automatic Shut-Off Factory Set ..3000 PSIG c 0) TO §2 System can be used with any inert industrial gas. Provides performance, reliability and portability at an affordable price. Includes relief valve for integrated air drive protection Includes adjustable automatic pneumatic shut-off switch Provides alternate drive sources & drive Media Options Media can be the same as the gas being boosted (except oxygen) Media can be supplied from an external source (okay with oxygen) Features drive air and process gas separation Design incorporates Integrated cooling jacket to minimize heat from compression and extend seal life. Plugged V4" NPT Relief Valve port; recommend using RV protection.

87114 MINI GAS CHARGING SYSTEM Supply Vessel Volume: Fill Vessel Volume: Booster Drive Pressure: Fill Vessel Starting Pressure: 0 psig GAS INLET PORT 1/4" FNPT (3500 PSIG MAX) , GAS OUTLET PORT ^ 1/4" FNPT (4000 PSIG MAX) ALTERNATE AIR DRIVE INLET PORT 1/2" FNPT (150 PSIG MAX) (PLUGGED) ALTERNATE REUEF VALVE PORT 1/4" FNPT (PLUGGED) STANDARD CONFIGURATION © Haskel's Oxygen cleaning procedures and facility conform to MIL STD 1330D, the highest oxygen cleaning standard approved by the US Navy. OXYGEN OUTLET < PORT 1/4" FNPT (4000 PSIG MAX)