Delivering Peak Performance High-pressure, high-temperature subsea valves

Table of Contents Introduction to Subsea Valves 6,000 PSI Ball Valves Check Valves Needle Valves Additional Subsea Valves

In subsea critical systems, nothing is more important than structural integrity to assure performance, safety and reliability. BuTech API 6A (19th ed.), ISO 10423:2003 PRs, Annex F/PSL3G qualified valves ensure the highest quality and most reliable performance for pressure control systems, throughout the entire life of the subsea structure. BuTech subsea valves meet performance, safety and reliability expectations in the deepest water and harshest environments in the offshore oil and gas industry. As wells have become deeper, BuTech has been a leader at developing new and innovative ways to control...

Subsea Ball Valves Subsea Needle Valves • Non-rotating, non-rising stem prevents galling and scoring • Metal to metal seating • Stem packing below threads prevents thread galling and fouling • Positive gland locking device • Special alloys available for extreme service • High temperature stem packing available • Bracket or panel mounting • Externally sealed design for depths to 14,000' (4200 meters) • Wide variety of end connections and actuation handles • Rapid quarter turn action provides quick open/ close action for easy ROV or diver operation • Independent spring-loaded seals for full differential...

• Ensure flow in only one direction • Rated to pressures of 15,000 psig and above • Designed to the same rigorous standards as Subsea Ball and Needle Valves, insuring a long, maintenance free life • Available in all machinable alloys • Externally sealed design for depths to 14,000' • Available with soft seat o-ring style or metal to metal seat poppet style • Cracking pressures can be factory set to a desired pressure Availability • Pipe - NPT threads • Also available: API, flange, zero clearance socket weld, butt weld, SAE, JIC, BSP, ISO and others

Subsea Ball Valves 15,000 PSIG C-2130-01 Subsea Ball Valve 2-way, 90 deg Turn 15,000 psig .312” 3.4 Single 2507 SD Inconel 625 Inconel 625 HNBR 2269-90 Various ROV 3.62” 1.75” 5.36” 22,500 psig 36 ft-lbs Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem Valve Features • 15,000 psi service • NACE construction – MR0175 up to H2S pressure of .01 MPa (1.5 psia) • ½” Sq. stem • ROV operation with API bucket mounting • Available in 3-way configuration with CV of 2.4

C-3639-02 Subsea Ball Valve 3-way, 90 deg Turn 15,000 psig .375” 2.4 Double 2507 SD Inconel 625 2507 SD HNBR 2269 Various ROV 5.12” 2.25” 9.78” 22,500 psig Subsea Ball Valve 2-way, 90 deg Turn 15,000 psig .375” 3.4 Double 2507 SD Inconel 625 2507 SD HNBR 2269 Various ROV 5.12” 2.25” 9.78” 22,500 psig Valve Features • Dynamic cup-seal on rotating stem • Double barrier design • NACE construction – MR0175 up to H2S pressure of .02 MPa (3.0 psia) • ½” sq. stub stem • API Bucket mounted with custom blade handle • Available as 2-way straight, 2-way angle and 3-way with mid-stroke shut-off M8X1.25MM...

C-1768-02 Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem

Valve Features • Internally vented at mid-stroke to prevent cross contamination of injection fluids • Hub stop included on ½” sq. stem • Low torque operation • Side bracket mounted • Other flow patterns available Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem TYPICAL SIDE CONN POSITION #1 (INLET) FLOW THRU POSITION #2 (VENT) FLOW BLOCKED POSITION #3 (INLET) FLOW THRU 1/4'' FNPT CONN VIEW Z-Z

Valve Features • Economical 316 construction • 10,000 psi service • V2’ Sq. stem • Side mounting • Optional hub and stops

TYPICAL SIDE CONN

C-1727-02 Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem Valve Features • Most common 1/2” sub-sea ball valve • Economical 316 construction • 10,000 psi service • ½’ Sq. stem • API bucket mounting M8X1.25MM TAPS (4) PLACES ON THIS SURFACE

C-3210-01 Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem Subsea Ball Valve 4-way, 90 deg turn 10,000 psig .125” 1.2 Single 316 Inconel 625 316 Buna-N Various ROV 4.00” 4.00” 8.52” 15,000 psig Valve Features • Unique porting to prevent cross contamination of injection fluids • Blade handle adapter to ½” sq. stem • API bucket mounted TYPICAL SIDE CONN 10.97'' (278.6) M8X1.25MM TAPS (4) PLACES =(IN VALVE BODY) 3/8'' (9.5) DRILL THRU (4) PLACES (IN ROV BUCKET)

B A THRU B & C THRU D PORTS OPEN A THRU D & B THRU C PORTS OPEN

C-1128-01 Description Detail MAWP Orifice CV Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem Valve Features • Dynamic cup-seal on rotating stem • Double barrier design • ½” sq. stub stem • API Bucket mounted Subsea Ball Valve 2-way, 90 deg Turn 10,000 psig .375” 2.4 Double 316 Inconel 625 316 Nitrile Various ROV 5.12” 2” 7.86” 15,000 psig 36 ft-lbs TYPICAL SIDE CONN

Valve Features • Economical 316 construction • 10,000 psi service • V2’ Sq. stem • ROV operation with "T" handle and API bucket mounting • Offset "T" and "L" handles available