CleanMist ® and FEF
12Pages

CleanMist® and FEF Centrifugal filters for oil mist and electrostatic filters

HFILTRATION S.r.l. was created from the spin-off, in 2013, of Hascon Engineering that has been operating for 30 years in the field of air dedusting and filtration in multiple industries safeguarding the environment and its sustainability applying the Quality and Environmental Certification ISO 9001 and ISO 14001 standards. The experience gained over the years, and technical staff competence, allow HFiltration to offer highly qualified advice and assistance able to identify the best possible solution in filtration and dust extraction fields. HFiltration develops and markets air filtering...

The CleanMist® range can meet all your oil mists filtering requirements thanks to the following advantages: Wide Field Of Application Low noise 68÷75 dBA depending on the model Maintenance Limited, thanks to the self-cleaning drum The filter is accessible from various sides to facilitate cleaning Simple installation Wide range of support frames Recycling of processed oil Pressurized oil drainage Prompt delivery Customized solutions Three filtering stages 60 Hz versions Customization Special colors on request Technical advice Support for the identification of the most appropriate solution,...

Flow diffuser Lower body Filtering panels Venturi perforated metal sheet drum Drainage tube Upper body Fastening brackets 10 Inner silencer 11 Motor 12 Silencer 5 The air polluted by oil mist or coolant is channelled inside the centrifugal filter crossing the inlet providing a grid so as to prevent the suction of solid material. A conic diffuser guarantees the uniform distribution inside the drum of the mist and vapour that are centrifuged at high speed and then pushed towards the filtering panels. While crossing the panels, the particles undergo a coalescence effect turning into droplets...

Fixing: no. 3 pins M8 on Ø 250 mm for models CM 300 and CM 500 Fixing: no. 4 holes Ø12 on Ø 515 mm for models CM 1000÷2300

Support Systems CleanMist® design provides for specific support systems to ease the installation of the filter on any kind of machine. Direct installation of the filter on the machine (CM 300 and CM 500 only) Overhanging support for the horizontal installation of the filter Reclining frame with cantilevered support for installation on top of the machine Filter on adjustable frame Overhanging support for the filter installation on the side Closed machine tool Adjustable frame for the filter installation on open machine tool Open and semi-open machine tool

Light processing Light processing without smoke or solid particles does not require further filtration by means of final cartridges or electrostatic filters.

Medium-heavy processing Medium-heavy processing with smoke and solid particles could require the installation of a final cartridge or an electrostatic filter FEF and/or other accessories so as to guarantee a proper functioning. Our technicians are available to design the proper dimensioning of the centrifugal filter.

Very heavy processing Very heavy processing or continuous production cycles require necessarily the installation of final cartridges or electrostatic filters FEF together with specific accessories to further improve the centrifugal filter performances. FEF 3 Mini cyclone Mini cyclone

Final Electrostatic Filter The FEF (Final Electrostatic Filter) operates according to the principle of ionization of polluting particles. The air which exits the CleanMist® filter passes through a “ionizing” section where particles up to 0.03 microns receive a strong electric charge. The air flow passes through a second “collecting” section made of IN plates with opposite electric charge. Ionized polluting particles are attracted by the plates, sticking to them. Treated air is discharged in the A environment with 99% of impurities removed. FEF2 FEF 2 and centrifugal filter with overhanging...

Proper maintenance ensures our filters smooth operation and high efficiency. For this reason we do not just sell our products, but we support our Customers, both providing preventive training courses and ensuring immediate intervention of our technicians if malfunctioning occurs. In addition to regular maintenance - machine functional testing after installation and technical assistance on request - we offer scheduled maintenance programs on an annual or triennial basis. We have noticed that preventive assistance reduces by 60% the number of interventions required for repair operations, thus...

HASCON FILTRATION S.r.l. Via Firenze, 69 20025 LEGNANO (MI) - ITALY Tel. +39 0331 52.74.03 Fax: +39 0331 52.74.84 www.hfiltration.it