604 Progress Dr., Hartland, WI 53029 USA Tel: (262) 367-4299 Fax: (262) 367-5645 Email: [email protected] FRAME 3 PVX 7112 (112 cm.³/rev.) (7.0 in.³/rev.) VARIABLE DISPLACEMENT, AXIAL PISTON, SWASH PLATE DESIGN PUMP Features: Offered with a standard SAE ‘C’ 2- & 4-bolt mount. Incorporated in a compact design with rugged ductile iron frame. Offered with variety of porting configurations. Offered with a variety of drive shaft options. Is Service friendly. Equipped with Viton shaft seal and O-rings. Can be fitted with a variety of control options. Equipped with maximum and minimum volume stops. The latter is adjustable. This versatile PVX pump is aimed at operating in both industrial and mobile applications. With its continuous operating pressures ranging from 500 to 3500 psi, and shaft speeds up to 2200 rpm at atmospheric inlet conditions, this pump is designed for a long and dependable service.

Input-shaft torque may not exceed the total of front-pump torque and (if added) rear-mounted units. MODEL SPECIFICATION CHART DRIVESHAFT "|" SPECIAL FEATURES V - SPECIAL" W - WATER BASE CS - SAE C SPLINE CK - SAE C KEYED CC - SAE CC SPLINE KC - SAE CC KEYED REAR COUPLING AS - SAE A SPLINE AK-SAEA KEYED AB - SAE AB SPLINE BA - SAE AB KEYED BS - SAE B SPLINE BK-SAEBKEYED BB - SAE BB SPLINE KB - SAE BB KEYED CS - SAE C SPLINE" CK-SAEC KEYED" REAR FLANGE A -SAE A PAD B-SAE B PAD C-SAE C PAD" ROTATION / PORTS 18 CW / REAR PORT 19 CCW / REAR PORT 2O CW / SIDE PORT 21 CCW / SIDE PORT STAC K CONTROLS...

PVX7112 pump performance @ 1750 rpm using ISO 32 oil at 115o F Pump typical weight: Side-Ported 150-155 lbs. Rear-Ported 145 lbs.

FRONT MOUNTING FLANGE DRIVESHAFT OPTIONS SAE SHAFT MOUNTING FLANGE O-RING PORTS MOUNTING FLANGE