*mydirectindustry

PVX 580

Product catalog summary

Overview: The PVX 580 is a variable displacement, axial piston, swash plate design pump suitable for both industrial and mobile applications. It operates with continuous pressures from 500 to 4000 psi and shaft speeds up to 2800 rpm, ensuring long and reliable service.

Features:

Standard SAE ‘C’ 2- & 4-bolt mount.
Compact design with a rugged ductile iron frame.
Various porting configurations and drive shaft options.
Service-friendly with Viton shaft seal and O-rings.
Multiple control options and adjustable volume stops.

Specifications:

Rated pressure: 4000 psi, Peak pressure: 5000 psi, Minimum pressure: 500 psi.
Theoretical flow at 1800 rpm: 39.0 gal/min.
Maximum shaft speed: 2800 rpm, Minimum shaft speed: 600 rpm.
Output torque at rated pressure: 3,184 in-lb.

Performance:

Typical weight: Side-Ported 118 lbs, Rear-Ported 110 lbs.
Performance at 1750 rpm using ISO 32 oil at 115°F shows efficiency, flow, and power output curves.

Model Specification Chart: Various configurations available for special applications, including different shaft types and control options like fixed and adjustable flow-load sensors, pressure compensators, and electronic controls.

Graphical Data:

Output flow and power vs. system pressure.
Input torque and power vs. system pressure.
Inlet characteristics based on ISO 32 Oil at 115°F.

Catalog excerpts

pumps - morons - controls 604 Progress Dr., Hartland, WI 53029 USA Tel: (262) 367-4299 Fax: (262) 367-5645 Email: sales@hartmanncontrols. com URL: http://www.hartmanncontrols.com PVX 580 (80 cm.3/rev.) (5.0 in.3/rev.) VARIABLE DISPLACEMENT, AXIAL PISTON, SWASH PLATE DESIGN PUMP This versatile PVX pump is aimed at operating in both industrial and mobile applications. With its continuous operating pressures ranging from 500 to 4000 psi, and shaft speeds up to 2800 rpm at atmospheric inlet conditions, this pump is designed for a long and dependable service. Features: r Offered with a standard SAE 'C' 2- & 4-bolt mount. ^ Incorporated in a compact design with rugged ductile iron frame. > Offered with variety of porting configurations. ^ Offered with a variety of drive shaft options. > Is Service friendly. > Equipped with Viton shaft seal and 0-rings. > Can be fitted with a variety of control options. > Equipped with maximum and minimum volume stops. The latter is adjustable.

Open the catalog to page 1

Input-shaft torque may not exceed the total of front-pump torque and (if added) rear-mounted units. MODEL SPECIFICATION CHART CS - SAE C SPLINE CK - SAE C KEYED REAR COUPLIN G V - SPECIALa W - WATER BASE STACK CONTROLS AS - SAE A SPLINE AK - SAE A KEYED AB - SAE AB SPLINE BA - SAE AB KEYED BS - SAE B SPLINE BK-SAEBKEYED BB - SAE BB SPLINE KB - SAE BB KEYED CS - SAE C SPLINEA CK-SAECKEYEDa RE A R FLANGE FL - FIXED FLOW-LOAD SENSOR AL - ADJUSTABLE FLOW-LOAD SENSOR SS - SOFT START, ON / OFF CONTROL 1 TQ - TORQUE LIMITER ** TOP CONTROLS A -SAE A PAD B-SAE B PAD C - SAE B PADa ROTATION / PORTS PC...

Open the catalog to page 2

FRAME 2, PVX 580 PERFORMANCE PVX580 pump performance @ 1750 rpm using ISO 32 oil at 115o F 100 Volumetric Efficiency (%) 70 Output Flow (gpm) Output Power (HP) PVX580 pump input power curves @ 1750 rpm using ISO 32 oil at 115o F 100 PVX580 pump inlet characteristics based on ISO 32 Oil @ 115oF 20 Pump typical weight: Side-Ported 118 lbs. Rear–Ported 110 lbs. Overall Efficiency (%) Input Torque (in-lb) Input Power (HP)

Open the catalog to page 3