HIGH RESOLUTION PRESSURE COMPENSATOR FOR PVX SERIES PUMPS 53580-1 pump pressure adjustment up to 5,000 psi (350 Bar) * 53580-2 pump pressure adjustment under 3,000 psi (210 Bar) Hartmann Controls, Inc. Phone: (262)367-4299 | Fax: (262)367-5645 URL: www.hartmanncontrols.com | Email: [email protected] *Setting determined by maximum pressure rating of pump series being utilized.

The Neutral Adjustment is Factory Set, and should only be changed by qualified personnel PARTS AND/OR SPECIFICATIONS ARC SUBJECT TO CHANCE WITHOUT NOTICE THE INFORMATION CONTAINED HEREIN MANNER DETRIMENTAL

6QA PROGRESS DRIVE HART LAND. Wl E3C29 NOT TO SCALE PARTS AH D/OR SPEDIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE THE INFORMATION CONTAINED HEREIN IS THE PROPERTY OF HARTMANN CONTROLS, INC., AND IS NOT TO BE USED IN A MANNER DETRIMENTALTO HARTMANN CONTROLS, INC. LAYOUT OF FHI —RESOLUTION PRESSURE COMENSATQR CONTROL

1. LOOSEN THE ACORN NUT AND REMOVE IT COMPLETELY 2, INSERT AN ALLEN WRENCH (5/32") INTO SCREW HEX 3, HOLDING THE SCREW WITH THE ALLEN WRENCH, UNLOCK THE JAM NUT 4. WHILE WATCHING THE PRESSURE GAUGE, TURN THE ALLEN WRENCH GENTLY IN 1/4 TURNS: CLOCKWISE TURNS INCREASE THE PRESSURE COUNTER-CLOCKWISE TURNS DECREASE THE PRESSURE 5, WHEN DESIRED PRESSURE IS REACHED, HOLD THE ALLEN WRENCH IN THE SCREW AND TIGHTEN THE JAM NUT 6. INSTALL THE ACORN NUT AND TIGHTEN NOT TO SOLE FARTS AND/OR SPECIFICATIONS ARE SUBJECT TP CHANGE W1THOUT NOTICE THE INFORMATION CONTAINED HEREIN IS THE PROPERTY OF HARTMANN CONTROLS,...

NOT TO S.CALE PARTS.AND/OR SPECIFICATIONS ARE $MECT TO CHANGE WITHOUT NOTICE THE INFORMATION CONTAINED HEREIN IS THE PROPERTY' fjF HARTMANN CONTROLS INC., AND IS: NOT TO BE USED IN A MANNER DETRIMENTAL TO HARTMANN CONTROLS INC. DWG NQs :53580PUMP PVf PUMP WITH HI -RES PRESSURE COMENSATOR CONTROL BR-1707-PVXPC

TYPICAL 53580-2 HIGH RESOLUTION PRESSURE-C OMPENSATED PERT ORMAN CE OF A VARIABLE DISPLACEMENT PISTON PUMP; ISO 32 OIL (§ 115*F