*mydirectindustry

MODEL 360

Product catalog summary

Overview: The PVX 360 is a variable displacement, axial piston pump with a swash plate design, suitable for both industrial and mobile applications. It operates at pressures from 500 to 3500 psi and shaft speeds up to 2800 rpm, ensuring long and reliable service.

Features:

Available with standard SAE 'B' and 'C' mounts.
Compact design with a durable ductile iron frame.
Various porting configurations and drive shaft options.
Service-friendly with Viton shaft seal and O-rings.
Multiple control options and adjustable volume stops.

Specifications:

Rated pressure: 3500 psi, peak pressure: 4000 psi, minimum pressure: 500 psi.
Theoretical flow at 1800 rpm: 28.5 gal/min.
Output torque at rated pressure varies by shaft size: SAE B (1450 in-lb), SAE BB (2200 in-lb), SAE C (3700 in-lb).

Performance:

Typical weight: Side-Ported 68 lbs, Rear-Ported 62 lbs.
Performance curves indicate efficiency, flow, and power output at various pressures and speeds.

Graphical Data:

Output flow and power vs. system pressure show efficiency trends.
Input power curves demonstrate torque and power requirements.
Inlet characteristics based on ISO 32 oil at 115°F highlight suction pressure and system pressure relationships.

Catalog excerpts

604 Progress Dr., Hartland, WI 53029 USA Tel: (262) 367-4299 Fax: (262) 367-5645 Email: [email protected] FRAME 1 PVX 360 (60 cm.³/rev.) (3.7 in.³/rev.) VARIABLE DISPLACEMENT, AXIAL PISTON, SWASH PLATE DESIGN PUMP Features: Offered with standard SAE ‘B’, 2- & 4-bolt mount or SAE ‘C’ 4-bolt mount. Incorporated in a compact design with rugged ductile iron frame. Offered with variety of porting configurations. Offered with a variety of drive shaft options. Is Service friendly. Equipped with Viton shaft seal and O-rings. Can be fitted with a variety of control options. Equipped with maximum and minimum volume stops. The latter is adjustable. This versatile PVX pump is aimed at operating in both industrial and mobile applications. With its continuous operating pressures ranging from 500 to 3500 psi, and shaft speeds up to 2800 rpm at atmospheric inlet conditions, this pump is designed for a long and dependable serv

Open the catalog to page 1

Input-shaft torque may not exceed the total of front-pump torque and (if added) rear-mounted units. MODEL SPECIFICATION CHART SPECIAL FEATURES BS - SAE B SPLINE*** BK - SAE B KEYED*** BB - SAE BB SPLINE*** KB - SAE BB KEYED*** CS - SAE C SPLINE**** CK - SAE C KEYED**** REAR COUPLIN G V - SPECIALa W - WATER BASE (SAE B ONLY)a STACK CONTROLS FL - FIXED FLOW-LOAD SENSOR AL - ADJUSTABLE FLOW-LOAD SENSOR SS - SOFT START, ON / OFF CONTROL * TQ - TORQUE LIMITER ** AS - SAE A SPLINE AK-SAEA KEYED AB - SAE AB SPLINE BA - SAE AB KEYED BS - SAE B SPLINEA BK - SAEBKEYEDa REAR FLANGE TOP CONTROLS A - SAE...

Open the catalog to page 2

FRAME 1, PVX 360 PERFORMANCE PVX360 pump performance @ 1750 rpm using ISO 32 oil at 115o F 60 Output Flow (gpm) Output Power (HP) Volumetric Efficiency (%) Typical PVX360 pump input power curves @ 1750 rpm using ISO 32 oil at 115o F 80 PVX360 pump inlet characteristics based on ISO 32 Oil @ 115oF 20 Pump typical weight: Side-Ported 68 lbs. Rear–Ported 62 lbs. Overall Efficiency (%) Input Torque (in-lb) Input Power (HP)

Open the catalog to page 3

AB SPLINE REQUIRES A .38'' WIDE FLANGE EXTENDER

Open the catalog to page 4

MODEL 360

MODEL 360

Catalog excerpts

All Hartmann Controls catalogs and technical brochures