Catalogs >
Hartmann Controls >
MODEL 110/122

MODEL 110/122
4Pages

Catalog excerpts

PUMPS - MOTORS - CONTROLS 604 Progress Dr., Hartland, WI 53029 USA Tel: (262) 367-4299 Fax: (262) 367-5645 Email: sales@hartmanncontrols.com URL: http://www.hatmanncontrols.com FRAME 0 PVX 110-122 SERIES 10 - 22 cm.3/rev.) (0.61 - 1.34 in.3/rev.) VARIABLE DISPLACEMENT, AXIAL PISTON, SWASH PLATE DESIGN PUMP Features: r Offered with standard SAE 'A', 2-bolt mount. > Incorporated in a compact design with rugged ductile iron frame. > Offered with variety of porting configurations. > Offered with a variety of drive shaft options. > Is Service friendly. > Equipped with Viton shaft seal and 0-rings. > Can be fitted with a variety of control options. > Equipped with maximum and minimum volume stops. The latter is adjustable across the full displacement range. This versatile PVX pump is aimed at operating in both industrial and mobile applications. With its continuous operating pressures ranging from 150 to 3500 psi, and shaft speeds up to 3200 rpm at atmospheric inlet conditions, this pump is designed for a long and dependable service.

Open the catalog to page 1

FRAME 0, PVX 110-122 SPECIFICATIONS RATED PRESSURE PEAK PRESSURE MINIMUM PRESSURE SHAFT SPEED OUTPUT TORQUE @ RATED PRESSURE SHAFT SIZE RECOMMENDED TORQUE LIMIT ■lb (38.4 N-m) ■lb (46.0 N-m) ■lb (53.6 N-m) ■lb (62.9 N-m) ■lb (69.3 N-m) ■lb (76.8 N-m) ■lb (84.4 N-m) Input-shaft torque may not exceed the total of front-pump torque and (if added) rear-mounted units. MODEL SPECIFICATION CHART SPECIAL FEATURES AS - SAE A SPLINE AK - SAE A KEYED AB - SAE AB SPLINE BA - SAE AB KEYED REAR COUPLING V - SPECIAL, CF STACK CONTROLS FL - FIXED FLOW-LOAD SENSOR AL - ADJUSTABLE FLOW-LOAD SENSOR SS - SOFT...

Open the catalog to page 2

FRAME 0, PVX 110-122 PERFORMANCE PVX110 pump performance @ 1750 rpm using ISO 32 oil at 115o F 10 PVX116 pump performance @ 1750 rpm using ISO 32 oil at 115o F 100 PVX122 pump performance @ 1750 rpm using ISO 32 oil at 115o F 100 14 Output Flow (gpm) Output Power (HP) PVX110-122 pump inlet characteristics based on ISO 32 Oil @ 115oF 30 Output Flow (gpm) Output Power (HP) PVX118 pump performance @ 1750 rpm using ISO 32 oil at 115o F Pump typical weight: Side-Ported 37 lbs. Rear–Ported 35 lbs. Volumetric Efficiency (%) Output Flow (gpm) Output Power (HP) Output Flow (gpm) Output Power (HP)...

Open the catalog to page 3

DRIVESHAFT OPTIONS SAE SHAFT

Open the catalog to page 4

MODEL 110/122 4Pages

Catalog excerpts

All Hartmann Controls catalogs and technical brochures

MODEL 110/122
4Pages