*mydirectindustry

PRÄZITHERM

Product catalog summary

Overview: The document provides technical specifications and operational details for the PRÄZITHERM high-temperature hot plate made of titanium, capable of reaching temperatures up to 600°C. It is designed for continuous operation and is equipped with either a PID temperature controller or a programmer.

Specifications:

Material and Dimensions: The hot plate is made of titanium with dimensions of 280 x 200 mm. The constant temperature area is 230 x 160 mm.
Temperature: Maximum temperature is 600°C, achieved in approximately 20 minutes.
Construction: The casing is made of stainless steel with special insulation allowing placement on heat-sensitive surfaces. Side heat shields minimize external casing temperature.
Cover: An insulated snap-lid reduces heat loss and allows for precise heating of flat parts with a 26 mm gap between the lid and the heating surface.

Controllers:

Temperature Controller (TR 28-3T): Microprocessor-controlled PID regulator maintains set temperature with a deviation of 2 K or less.
Programmer (PR 5-3T): Allows programming of up to 5 ramps per profile, with phases for heating, holding, and cooling. Features include a programmable lead time of up to 99 hours, easy parameter selection, and EEPROM data backup.

Features:

Both controllers display actual temperature constantly, with the programmer also showing remaining ramp time.
Devices can be equipped with a temperature limiter to prevent overheating.
Equipment includes a two-poled main switch, adjustable proportional range, and uninterrupted switching.

Technical Data:

Voltage: 230 Volt / 50-60 Hz
Power: 2000-2200 Watt
Temperature Spread: ±2 K
Cable Length: 1.5 m to 1.8 m
Dimensions and Weight: Vary depending on model, with weights ranging from 1.4 kg to 10 kg.

Catalog excerpts

PRAZITHERM Hochtemperatur-Heizplatte aus TITAN bis 600 °C fur Dauerbetrieb mit PID-Temperaturregler oder Programmregler PRAZITHERM High temperature hot plate of TITANIUM up to 600oC for continuous operation with PID - Temperature Controller or Programmer

Open the catalog to page 1

HOCHTEMPERATUR - HEIZPLATTE aus Titan bis 600 °C PZ 28-3T Die Hochtemperatur-Heizplatte erreicht ihre Hochsttemperatur von 600°C in ca. 20 Min.. Die Heizflache besteht aus TITAN und hat die Abmessung 280 x 200 mm, wobei das konstante Temperaturfeld 230x160 mm betragt. Durch eine aufwendige Isolierung des Gehauses kann das Gerat auch auf warmeempfindliche Standfiachen aufgestellt werden. Seitliche Warmeschutzbleche reduzieren die auSere Gehausetemperatur auf ein Minimum. Durch den isolierten Klappdeckel wird der Warmeverlust erheblich vermindert und kurze Aufheizzeiten erreicht. Bei geschlossenem...

Open the catalog to page 2

PRÄZITHERM

PRÄZITHERM

Catalog excerpts

All Harry Gestigkeit GmbH catalogs and technical brochures