*mydirectindustry

Catalogs
Harrison Silverdale
Series 40112 Type: CNSS

Series 40112 Type: CNSS

Product catalog summary

Overview: The document provides technical specifications for Series 40112 Type CNSS Stainless Steel Cage Nuts. These components are designed to offer a captive nut solution, allowing the nut to be held in place for later screw engagement, particularly useful in situations where access is limited to one side.

Material and Finish: The cage nuts are made from 304 Stainless Steel and have a self-colour finish.

Applications: Commonly used in 19" server cabinets and other metal enclosure cabinets, the cage nuts allow for panel misalignment during assembly due to the floating nature of the square nut within the cage.

Specifications: The document lists various part numbers with corresponding thread sizes (M4, M5, M6, M8, M10, M12), panel range, and dimensions (A, C, D, E, G, and hole size). Each part number specifies the panel thickness range it can accommodate and the precise dimensions for installation.

Important Note: All information is provided for guidance only. Designers are advised to verify the suitability of the specifications by requesting samples.

Catalog excerpts

Open the catalog to page 1

Harrison Silverdale Ltd Unit 1 Traso Business Park. Callywhite Lane. Dronfield, Sheffield, S18 2XR Tel: 01246 296 930 • Fax: 01246 296 940 Email: [email protected] Internet: http:/fwww.harrisonsilverdale.co.uk Continued from previous page... All information is given for guidance only and designers should satisfy themselves as to the suitability of the specification by requesting samples

Open the catalog to page 2

Harrison Silverdale Ltd Unit 1 Traso Business Park. Callywhite Lane. Dronfield, Sheffield, S18 2XR Tel: 01246 296 930 • Fax: 01246 296 940 Email: [email protected] Internet: http:/fwww.harrisonsilverdale.co.uk Continued from previous page... Series: 40112 Type: CNSS Cage Nuts provide a simple but effective captive nut solution. This allows the nut to be held in place so the screw can be engaged later in the assembly process, or if access is not possible from both sides. The square nut floats in the cage allowing for mis-alignement of panels in assembly. Typical aplications are...

Open the catalog to page 3

Harrison Silverdale Ltd Unit 1 Traso Business Park. Callywhite Lane. Dronfield, Sheffield, S18 2XR Tel: 01246 296 930 • Fax: 01246 296 940 Email: [email protected] Internet: http:/fwww.harrisonsilverdale.co.uk Continued from previous page... All information is given for guidance only and designers should satisfy themselves as to the suitability of the specification by requesting samples

Open the catalog to page 4

All Harrison Silverdale catalogs and technical brochures

Archived catalogs

Specialised Fasteners
67 Pages