Harrison Silverdale Ltd Unit 1 Traso Business Park. Callywhite Lane. Dronfield, Sheffield, S18 2XR Tel: 01246 296 930 • Fax: 01246 296 940 Email: [email protected] Internet: http:/fwww.harrisonsilverdale.co.uk Self Clinch Floating Nuts Part No. Floating Clinch Nuts are a very useful fastener for reducing the problems caused in assembly of pre-fabricated boxes where tolerance build up or inaccuracies due to bends occur. Whilst the outer shell of the fastener is captive in the sheet there is a separate inner nut which moves within the outer shell without rotating. This allows a small amount of movement to allow for misalignement. Thread locking versions are also available. These products are suitable for use in materials of Rockwell Hardness of B - 70 or less. Materials & Finishes:-Steel Trivalent Zinc (code 60)303 Stainless Steel Self Colour (Code SS)To specify use Series No/Part No/Finish Code (eg 30307 M4FL-1 60)Thread locking version also available (Code FLL)

Harrison Silverdale Ltd Unit 1 Traso Business Park. Callywhite Lane. Dronfield, Sheffield, S18 2XR Tel: 01246 296 930 • Fax: 01246 296 940 Email: [email protected] Internet: http:/fwww.harrisonsilverdale.co.uk Continued from previous page... All information is given for guidance only and designers should satisfy themselves as to the suitability of the specification by requesting samples