Specifications:
The document provides specifications for a series of heatstake/press-in inserts, identified by part numbers such as TH020H040, TH025H050, etc. Each part number corresponds to specific dimensions including thread size (M), length (H), outer diameter (D), lead diameter (C), hole diameter (d-0.1), hole depth (P), and minimum wall thickness (E). For example, part number TH020H040 has a thread size of M2, length of 4.0, and outer diameter of 3.5.

Applications and Recommendations:
These inserts are recommended for use in thermoplastic applications. Their design, featuring sharp pointed barbs, ensures quick installation and allows the material to flow around the insert, providing high resistance to torque and maximum tensile strength.

Material and Finishes:
The inserts are made of brass with a self-color finish.

Usage Instructions:
To specify an insert, use the series number followed by the part number (e.g., 20103 TH030H050).

Disclaimer:
All information is provided for guidance only. Designers are advised to request samples to verify the suitability of the specifications for their specific applications.