Microwave measurement devices Continuous In- Line BRIX measurement

Transmissions signal passes through an in-homogenous product Description: The microwave measurement devices generate an electromagnetic wave of low energy. This signal is coupled via an antenna into the product. Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes....

The measurement is contacting, the measured values are available as BRIX, % (only % without constituent name), g/l, %H2O or TS. Because of further increasing quality requirements after ISO and EU standards, the industries have an enhanced demand for improved quality control, standardization and In-Line trend observation. The Harrer & Kassen microwave instrument can be installed at pipelines or vessels in a sugar plant. But consider: Install at a place where no air bubbles appear and ambient temperature is below 85°C When installing at a pipeline, always install in a vertical pipe after the pump...

Technical data HK6: Housing: Size H x W x D: Weight -C/ -C-CLN: -F/ -F-CLN: Protection Type: Power supply: PC-interface: 2 Analog outputs: Relay contact: PROFI-BUS-DP: Temperature sensor: Environmental temperature: Operation HK6-C / -C-CLN: Membrane keypad Display: Aluminum die casting 200 x 140 x 90 mm ca. 5 kg / ca. 7 kg ca. 6 kg / ca. 8 kg IP65 / NEMA 4 100 - 240 V/ AC optional 24V/DC - 50/60 Hz - max. 200mA RS232 optional RS485 0/4 - 20mA / isolated 1500V max. 5A / 250V AC (only for -CLN) optional (only for HK6-F / -F-CLN) NTC -20°C - +85°C 6 integrated soft keys 2x24 Sign LCD, LED- backlight...