Application of HARP ball bearings

Kharkov Bearing Plant HARP (formerly GPZ-8) holds leading position in the CIS in the manufacture of rolling bearings for agricultural machinery. Kharkov Bearing Plant manufactures over 500 types of bearings with outer diameter from 30 to 400 mm under the HARP, HARP-AGRO, HARP-AUTO and HARP AGRO UNIT trademarks, hot forged and cold-rolled semi-finished products and components for automotive, railway and industrial bearings. The plant was initially built to cover the needs in bearings for agricultural machinery. That is why HARP specialists better understand the difficulties both of the manufacturers...

PROVEN SOLUTIONS FOR YOlj! KHARKOV BEARING PLANT HARP (UKRAINE) • FORGED AND MACHINED SEMI-FINISHED PARTS OF THE BEARINGS • TRADE MARKS: HARP, HARP-AGRO, X-SHIELD, HARP AGRO UNIT, HARP-AUTO • PRODUCTION CAPACITY: OVER 30 MLN BEARINGS A YEAR • MORE THAN 500 TYPES OF BEARINGS WITH INNER DIAMETER FROM 16 TO 260 MM Quality and reliability • Full technological cycle of production of ball and roller bearings "from metal to packaging" • Quality control at every production stage • Raw materials testing • Rolling Bearings Test center equipped with modern control monitoring and measuring appliances • International...

SEALED (MAINTENANCE-FREE) BEARING SOLUTIONS X-SHIELD — MULTI-LIP SEALS OF INCREASED TIGHTNESS Every agrarian needs bearings for agricultural machinery, which would increase the average time of failure-free operation, minimize expensive down time and maintenance time, as well as reduce production losses. In order to fulfill these requirements, HARP manufactures agricultural bearings with special X-SHIELD seals of increased tightness. The line includes the existing seals with K10 suffix, as well as new types of seals with K15-K19 suffixes, which are designed for different areas and conditions of work....

HOUSED BEARING UNITS One of the distinctive features of the HARP housed bearing units is the unique X-SHIELD seal, which provides reliable protection against dirt, dust and moisture, and also helps to maintain the lubrication in the bearing, which ensures maximum efficiency of the bearing, even in harsh operating conditions. ADVANTAGES Self-alignment of the bearing outer diameter and housing inner diameter Increased service life of the bearing unit Effective sealing X-SHIELD High-strength cast iron housing Device which eliminates rotation of the bearing outer ring in the housing Full interchangeability...

SEALED (MAINTENANCE-FREE) BEARING SOLUTIONS High-strength Simple adaptation and Super-reliable forged housing mounting on any three-level protection tillage implement of the bearing Reliable bearing with high-quality lubricant; no need for additional lubrication during service life Possibility to restore the unit, to replace the bearing EXAMPLES OF READY SOLUTIONS Hub assembly 8395.H5-160.47.f35.0H For disc harrow Lemken Rubin 9 Analogues: Lemken: 5554502, 55554503, 55510014, 55510015 FKL: PL-185-V30 Bearing unit 8395.H4-98.65.l28.014/ 8595.H4-98.80.l28.014 For agricultural machinery:...

Design modifications of the HARP ball bearings HARR Single-row ball bearings - work at high rotation rates; - assembled with steel or polyamide cage. compensated shaft misalignment; low friction rate and resistance to overheating.

Design modifications of the HARP ball bearings HARR Sealed single-row ball bearings - can be manufactured with shields or seals; - standard seal or reinforced X-SHIELD seal (allow to work in a dusty environment) - maintenance-free and lubricated for life.

Design modifications of the HARP ball bearings Single-row ball bearings with spherical mounting surface of outer ring - standard seal or reinforced X-SHIELD seal. Steel sheet protects bearing from penetration of soil, dust, gross impurities, and rubber lip protects from fine impurities, water, moisture and other; - compensated shaft misalignment; - no strict requirement for shaft surface accuracy.

Design modifications of the HARP ball bearings Double-row angular contact ball bearings - take radial and axial loads; - assembled with special seals; - take bending loads.

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model Unit OE - N Feed roller drive Gearbox wit intermediate drive assy SELF - LOADING WAGON QUANTUM 3800K/P/3500K/ P/S

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

GREAT PLAINS Model Working tool Working tool

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA

HARR Model

HARR Model Sales Department: tel +38 057 711-60-10; 710-10-59 HARP.UA