GRAN CUTTER SPCE SERIES Cartridge Type Series Name Motor (wattage) M'-WMMMM None: Hard Type SQilil^l CAPACITY fJKffRlilX^US SPRUE DIAMETER The sample cut service is available for your sprues and runners. • Very little dust Since the cut sprues and runners does not pass through the blades again, clean cut with a single swing action can minimize dust, static electricity, and heat generation. Gran-Cutter has the mechanism to cut the sprues and the runners into the certain size (as small as the virgin pellets) and is free from mis-cut (no screen). • Quiet operation Gran-Cutter does not make unnecessary movements, the operation is very quite. • Easy cleaning The regrind materials do not stick to the inner wall of the machine, because static electricity is kept minimum. The doors can open widely downward to provide easy access of the inside and reduce the cleaning time (5 to 7 minutes). • Soft materials ready too. The soft type Gran-Cutter SPC-S can now cut the soft type materials, which used to be impossible to cut before. spcn SERIES The hard type Gran-Cutter's processing capacity is the measured value when cutting the sprues; 6-nylon with 20% glass fiber, 6mm-max diameter, 4g-weight. The soft type Gran-Cutter's processing capacity is the measured value when cutting the sprues; thermoplastic elastomer, 6mm-max diameter, 3g-