Introduction
This document introduces a new cartridge type for press cutters, allowing customers to replace worn or tipped teeth at their own facilities.

Specifications
The new cartridge system enables easy replacement by removing four bolts and pulling out the cartridge. This system is compatible with SPCⅡ and GMⅡ models.

Procedures
1. Remove four bolts.
2. Pull out the cartridge.
3. Replace the necessary parts to convert the unit to the cartridge type.

Available Models
- SPCⅡ-200/400/750
- GMⅡ-200/400/750

Replaceable Parts
- Press Cutter Assembly
- Press Stationary Cutter

Manufacturer Information
INTERNATIONAL MARKETING DEPT.
Address: 4124-1, Minami-Minowa, Kamiina-gun, Nagano-pref. 399-4595, Japan
Tel: +81-265-73-8820
Fax: +81-265-73-8964
Website: www.harmo-net.co.jp

Certifications
ISO9001 Certified

Note
This brochure is subject to change without notice.