Specifications:
The EXⅢ Series Sprue Pickers are designed for injection molding machines with a capacity of 15 tons or less. They feature a swing angle of either 60° or 80° and include a built-in controller (HRS-12) with internal mold memory for 50 molds. The system supports five languages via a key sheet.

Features:
- Suitable for injection molding machines up to 15 tons, offering user-friendliness and agility.
- Newly designed with a maximum main cylinder descent start point adjustable to 150mm.
- Kick start position adjustable between 35mm and 200mm from the mounting base.
- Swing angle axis can be set to 60° or 80° depending on the mounting position.
- For safety, the sprue picker swings to the non-operator side.
- Equipped with the new HRS-12 controller.
- The back length is reduced by 60% compared to previous models.

Technical Data:
- Main Arm Vertical Stroke: Max 300mm
- Main Arm Kick Stroke: 25mm (fixed)
- Swing Angle: 60° or 80°
- Vertical Start Position: Adjustable from 0 to 150mm
- Grip Strip Position Adjustment: 35 to 200mm
- Air Consumption: 4 ℓ/cycle (ANR)
- Working Air Pressure: 0.5 MPa
- Max. Payload: 0.3 kg
- Weight (including pendant): 18.5 kg (19.0 kg)
- Power Supply: Single phase 200AC (50/60Hz)
- Power Consumption: 17.5 W
- Power Equipment Capacity: 18 VA
- Current Consumption: 0.09 A
- Circuit Breaker: 1A (Fuse)

Notes:
Air consumption values are based on the standard version of the robot.