Loop Power Level Weight Transmitters Applications PROCESS WEIGHING • Level-by-Weight • Force Measurement Wire Transmitter Year Warranty HI 2204LT LOOP POWERED LEVEL WEIGHT TRANSMITTER The Hardy HI 2204LT Loop Power Level Weight Transmitter is a stateof-the-art bridge to strain gages, load cells and load points. The lowcost HI 2204LT Loop Power Level Weight Transmitters are used for level-by-weight and force measurement applications. The HI 2204LT comes sealed and potted to withstand typical industrial environments. They have a coarse zero offset adjustment to remove deadload, a fine zero adjustment to compensate for small differences between load cells/points, and a span adjustment to set the operating range for the "liveload". The HI 2204LT powers the load cells/points momentarily at the rate of about 90 times per second and converts the signal read into a 4-20 mA output. The HI 2204LT is designed for use in nonhazardous environments. It produces a 5 VDC excitation voltage. The HI 2204LT is capable of developing its full 4-20 mA signal while requiring "liveload" of only 33% of total load cell capacity. This is true even when four 3 mV/V, 350 ohm load cells/ points are used. To learn more about the HI 2204LT visit our web site for: • full product specifications • ordering information • application notes • technical description • operator’s manual www.hardysolutions.com or call us: 800-821-5831 +1-858-278-2900 The HI 2204LT Series is available for standalone mounting or can be ordered from the factory in a NEMA 4X stainless steel or a NEMA 4 steel enclosure both with a multiload cell (up to 4) summing card.

COMPONENTS TO COMPLETE YOUR HARDY SYSTEM Hardy Bench Scales, Floor Scales and Load Points Hardy carries a wide variety of strain gauge load points and scale bases to accommodate your application requirements. * Barrier required when located in a hazardous area ADVANTAGE Series Load Point with C2 Calibration ANY-WEIGH Scales Weighing Instruments Dedicated to Your Applications Controllers, Weigh Modules, Transmitters Allen-Bradley® Compatible Plug-in Weigh Scale Modules HI 3000 Series HI 4050 Controllers and HI 6300 Series Loop Power • 15 to 50 volts DC across the transmitter • 15v minimum would...