Weight Indicator Applications PROCESS WEIGHING • Batching/Blending • Filling/Dispensing • Level by Weight • Check Weighing High in features and attractive in price, our HI 2110WI high-accuracy Digital Weight Indicator provides local indication, and acts as a front end to a PLC or DCS system. Weight data can be transmitted via any one of its communication options, including Allen-Bradley® Remote I/O, Profibus®, Analog and BCD. Features WAVERSAVER® • Ignores vibration on and around scales • Electronic calibration without test weights SMM-SD (Secure Memory Module with SD RAM) • Expandable automatic backup of configuration data for easy transfer to other instruments or your PC Hardy’s HI 2110WI conditions and digitizes the weight signal twenty times per second with over one million counts of resolution over a differential signal range of 0 to 15mv. It can then transmit a clean signal representing gross or net weight data to a PLC, PC or DCS system. This high resolution allows the weight indicator to tolerate large dead loads and oversizing of the load sensors, while retaining a high level of usable signal. The HI 2110WI supplies 5 volts of DC excitation to drive four 350-ohm load sensors, or load cells associated with a single scale. The indicator is available in panel mount or remote mount configuration. C2® ELECTRONIC CALIBRATION C2 enables electronic calibration of the weigh system without test weights. This saves system start-up costs and aggravation. Of course, even if C2 certified load sensors are not used, the system can still be calibrated the slow, traditional way using certified test weights. WAVERSAVER® WAVERSAVER eliminates the effects of unwanted plant vibration on or around the scale by permitting the weigh module to “see” through the unwanted vibration signals - as low as 0.25Hz - while yielding a stable actual reading. SECURE MEMORY MODULE The rear panel accessible Secure Memory Module (SMM) automatically protects and stores critical data. It allows this data to be physically transferred from one indicator to another. If a problem occurs, simply remove the current SMM and plug it into a new indicator, and your system will be up in running in minutes. EASY SYSTEM INTEGRATION We provide a variety of interface capabilities, including Allen-Bradley RIO, Profibus, Analog and BCD to connect to your PLC, PC or DCS system.

COMPONENTS TO COMPLETE YOUR HARDY SYSTEM Hardy Bench Scales, Floor Scales and Load Points Hardy carries a wide variety of strain gauge load points and scale bases to accommodate your application requirements. ADVANTAGE Series Load Point with C2 Calibration ANY-WEIGH Scales Hardy C2 Certified Cable This 8-conductor cable is designed for optimizing weight and load sensor characteristic signals from the junction box to the instrument. Hardy Junction Box (HI 215 Series) This NEMA 4 rated waterproof enclosure sums from one to four load sensor signals. Its unique design with multiple connectors allows...