Precision CNC Tooling for Mills
48Pages

PRECISION CNC TOOLING FOR MILLSPRECISION CNC TOOLING FOR MILLS HardingeHardinge >

Hardinge corporate headquarters and manufacturing facility, Elmira, New York, USA Hardinge. Solid since 1890. At Hardinge, our mission is to provide the When it comes to the toolholder,value is all about precision and reliability. Our CNC tool holding systems are Best Value in Workholding products to meetdemanding production levels and produce the quality of parts required in a competitive industry. precision ground to assure a stable holderwith the best possible TIR, resulting in better surface finishes, longer tool life and more accurate workpieces.Take pride in precision machining. Step...

Hardinge Manufacturing2Toolholder Illustrated Index4Hardinge Standards of Performance5 Toolholder Balancing6 - 7 ToolholdersBT-Flange Toolholders ER Collet Chucks8 - 9TG Collet Chucks10TG Collets11 End Mill Holders12, 13Hydraulic Grip End Mill Holders14Shell Mill Holders15 Tap Holders and Tap Collets16, 17Jacobs Taper Holders18Morse Taper Holders18 Semi-Flush Slitting Saw & Stub Arbor Holders19Boring Head Holders20Blank Holders20 Retention Knobs21 CAT-V Flange Toolholders ER Collet Chucks22, 23 TG Collet Chucks24TG Collets11End Mill Holders25, 26 Hydraulic Grip End Mill Holders27Shell Mill...

Collet Style Solid Style >

Do I need to balance the shell mills,taps, slitters, stub arbors, Jacobschucks, Morse taper and boring headtoolholders? > No, unless they are used at high rpm. Generally, these holders are run at low rpm and balance isnt a factor. Can I use the standard unbalancedER Collet Holders and End MillHolders on my 10,000 rpm spindle? > No, unless you are always runningless than 6,000 rpm. The BasicBalance holder should be used on10,000 rpm spindles and should also beused when machining above 6,000 rpmon 7,000 and 8,000 rpm spindles. >

OptionsDescriptionExplanation NoneStandard Holder?Holders are not counterbalancedBABABasic Balance?Unequal drive slot depths, set screws, taper holdersand other design asymmetries are counterbalancedBAFHG2.5 @ 15,000 rpm?Counterbalances toolholder body design asymmetry Includesbalanced standard nosepiece on collet chucksBAFRG2.5 @ 15,000 rpm?Counterbalances toolholder body and retention knob asymmetry ֖ Includesbalanced standard nosepiece on collet chucksBATHG2.5 @ 20,000 rpm?Counterbalances toolholder body design asymmetry Includes balancedstandard nosepiece on collet chucksBATRG2.5 @...

Coolant seals are shown on page 40.

Note: Retention knobs must be ordered separately for each holder ֖ see page 21 Note: Retention knobs must be ordered separately for each holder see page 21

Note: Retention knobs must be ordered separately for each holder ֖ see pages 34-35 5 ⁄ > 8 "-181.38"Erickson #37 & #50507939-50-02-008750 > 7 ⁄ > 8 "-201.38"SPI, Yuasa & Criterion507939-50-02-0150001 > 1 ⁄ > 2 "-181.38"SPI, Yuasa & Criterion > Note: Retention knobs must be ordered separately for each holder see pages 34-35

3.25"1.8125".75"4.00" 7.75"0.50" .5625" > .5000".4995" .5625".25".75" .75".8125" > .50" hole 2.50" 5.4375" 4.00"4.00"6.75" 5.5625".75".5625".28125"1.875".75" 7.3125" Front View Side View Front View Side View >

7.5MHI 0503 Printed in USA Sure-Grip ή ExpandingCollet Systems:Brochure #2270 HCAC ColletAdaptation Chucks:Brochure #2352Swiss-Type Colletsand Guide Bushings:Brochure #2283Toolholder Collets,Toolholder Bushings &Round Shank Holders:Brochure #2351 Sure-Grip ٮ 3-JawPower Chucks:Brochure #2357 ChuckJaws for AllBrands of Chucks:Brochure #2358 Machine ToolProductsOverview:Brochure #1190 Collets forAutomatics:Brochure #2287 HQC ή Quick-ChangeCollet Systems:Brochure #2339 Spindle Tooling forManual & CNCLathes:Brochure #2348 HardingeWorkholding/IndustrialProducts:Brochure #2353 Sure-Grip Hardinge...