Catalogs >
Hardinge Bridgeport >
HARDINGE CONQUEST H51 Bar and Chucking Machine

HARDINGE CONQUEST H51 Bar and Chucking Machine
12Pages

Catalog excerpts

HARDINGE CONQUEST H51 Bar and Chucking Machine - 1

HARDINGE TURNING CONQUEST H51 Bar and Chucking Machine THE CLEAR LEADER IN PIONEERING THE COLLET-READY SPINDLE

HARDINGE CONQUEST H51 Bar and Chucking Machine - 2

COLLET-READY SPINDLE DESIGN The Hardinge Advantage The Hardinge Group provides collets, step chucks with closers, dead-length systems, FlexC™ quick change, Sure-Grip® expanding systems, Sure-Grip® 3 jaw chucks and custom solutions to meet the flexible demands of manufacturing today. The Hardinge spindle design is both collet and jaw chuck-ready and does not require a spindle adapter Advantages include: • Collet seats directly in the Hardinge spindle • Maximum rigidity and gripping power is transferred to the part • Maximum utilization of RPM • Minimum weight on spindle • Minimum overhang...

Open the catalog to page 2

HARDINGE CONQUEST H51 Bar and Chucking Machine - 3

WORKHOLDING FLEXIBILITY Take your Hardinge collet-ready spindle lathe to the limit using flexible workholding options Hardinge is unique as a machine tool builder — we manufacture our own workholding products. Precision and accuracy is yours when you use Hardinge perfectly-mated workholding products. Hardinge hardened and ground collets are inspected and measured in a Hardinge SUPERPRECISION® spindle. Collets are available in fractional round, hex and square sizes and round metric, as well as round serrated fractional and metric sizes. Use adjustable, machinable collet stops for accurate...

Open the catalog to page 3

HARDINGE CONQUEST H51 Bar and Chucking Machine - 4

- MSY (Milling / Sub Spindle / Y Axis) - MYT (Milling / Y Axis /Tailstock) Continuous Machining Accuracy (CMA) H51 SP Standard CMA cycle Test Data High pressure coolant -230 ps Overall results show that machine is consistent and controllable with chiller on Best results when using certain setups with the coolant chiller (CMA within 0.0002") Less than 0.0007" of CMA in dry cutting case - MSY (Milling / Sub Spindle / Y Axis) - MYT (Milling / Y Axis /Tailstock) Standard Features • 20C collet / chuck ready main spindle • Through tool coolant • Three position stack light • Chip conveyor...

Open the catalog to page 4

HARDINGE CONQUEST H51 Bar and Chucking Machine - 5

FEATURES & OPTIONS BMT 55 Tooling Specs: • The Hardinge built turret was designed with increased clearance between the top plate and the turret covers, permitting the use of longer drill lengths and increased live tooling capabilities on the sub spindle option • Tooling size BMT55 • 12 station (½ station index for total of 24) • Belted live tooling drive – Better surface finishes during milling – No backlash or bevel gear noise • Index time rotation 0.40 sec • Index time clamp-unclamp 1.45 sec • Repeatability .000060” (1.52 micron) • Square shank 1.0”- 25mm • Round shank 1.5” - 38mm • Max...

Open the catalog to page 5

HARDINGE CONQUEST H51 Bar and Chucking Machine - 6

PERFECTING ACCURACY Super-Precision is a combination of best practice, design and manufacturing of hardware and software integrated into a machine tool that produces the highest level of precision for production turning centers that require the least amount of human intervention in the marketplace today. PERFORMANCE OF HARDINGE GROUP MACHINES DIAMOND TURNING PRECISION LEVEL GRINDING T SERIES – SUPER-PRECISION® TURNING 14 CONQUEST H51 – SUPER-PRECISION® QUEST SERIES – SUPER-PRECISION® CONQUEST H51 – High Performance GS SERIES – General Performance MICRONS The Hardinge CONQUEST H51...

Open the catalog to page 6

HARDINGE CONQUEST H51 Bar and Chucking Machine - 7

Key differentiators that set Hardinge SUPER-PRECISION® apart from High Performance and the competition: • High degree of machine stiffness qualified by Finite Element Analysis RESULTING PERFORMANCE • High accuracy of machine geometry: (ISO 230 Standard) Position accuracy – up to 2 micron (0.000080) X – up to 3.5 micron (0.000140) Z Straightness – up to 2.5 micron (0.000100) X – up to 2.5 micron (0.000100) Z Axis alignment to spindle axis – up to 2.5 micron (0.000100) Z • High roundness (circularity) capability – up to 0.25 micron (0.000010”); • High cylindricity capability – up to 0.5...

Open the catalog to page 7

HARDINGE CONQUEST H51 Bar and Chucking Machine - 8

MACHINE CONSTRUCTION Collet-Ready Main Spindle Robust 45o base structure The Hardinge collet-ready spindle is the most versatile machine spindle in the industry – it is uniquely designed to accept both collets and jaw chucks without the use of an adaptor. Because the collet seats directly in the spindle, the workpiece is held close to the spindle bearings which provides the ultimate in accuracy, rigidity and gripping force. It also allows for maximum spindle RPMs which increases productivity. This exclusive design also offers numerous workholding capabilities including solid collets, master...

Open the catalog to page 8

HARDINGE CONQUEST H51 Bar and Chucking Machine - 9

Mitsubishi Control • 15” color LCD display screen aids in viewing the various programming and function pages • The operators panel is custom-designed to be user friendly • Mitsubishi M720V control on robust pendant mount • The control pendent conveniently swings for better user access and can be moved out of the work zone for robot type applications where interlocking gate access is required • Full MSY capability • Navi-Turn programming is standard • Packed with standard features Standard Features General • Programmable Resolution —.000010”/.00010mm • Tool Offset...

Open the catalog to page 9

HARDINGE CONQUEST H51 Bar and Chucking Machine - 10

Fanuc Control • 10.4” color LCD display screen aids in viewing the various programming and function pages • The operators panel is custom-designed to be user friendly • Fanuc 0i-TD control on robust pendent mount • The control pendent conveniently swings for better user access and can be moved out of the work zone for robot type applications where interlocking gate access is required • Full MSY capability • Manual Guide-i (MG-i) programming is standard • Packed with standard features Standard Features General • Pendent-mounted Full Control • 10.4” LCD Display • Graphic Display • Embedded...

Open the catalog to page 10

HARDINGE CONQUEST H51 Bar and Chucking Machine - 11

SPECIFICATIONS Swing Diameter Max. Swing Over Way Covers Hardinge T-Style Static Top Plate 27.87” (708mm) Block Type (Static) bi-directional Square Shank (Left, Right or Inverted Tooling) Chuck Size Max. Bar Capacity Round Shank Tooling Max. Machining Length w/Tailstock BMT Index Time (rotation/including clampunclamp) Max. Machining Length w/Tailstock Hardinge T-Style Max. Machining Length w/Chuck BMT Max. Machining Length w/Chuck Hardinge T-Style Work Capacities Servo Driven Tailstock Morse Taper (no quill needed) Max. Power Rating (30 mins) Spindle Nose Spindle Nose Chuck Size (Chuck Not...

Open the catalog to page 11