H-­‐Series Tooling Catalog H-­‐51 BMT 55 H-­‐Series Lathes with BMT Tooling System

BMT 51 Tooling Note: All BMT Tooling can be utilized on either the Main or Second Spindle on any station.

H51 Top Plate Layout and Swing Over Way Covers

FG 0011944SQD 1” Double Square Shank Static Tool Holder with External Coolant

FG 0011944SQ 1”Single Square Shank Static Tool Holder with External Coolant

FG 0011944RL 1.5” Round Shank Static Tool Holder with Internal or External Coolant Note: Toolholder is NOT a through hole style Hardinge offers HDB-­‐12, HDC-­‐12-­‐VL and HDZ-­‐12-­‐VL bushings and sleeves to fit this holder Reducing Bushings and Sleeves are located beginning on page 20

FG 0011944RQ 3/4” Quad Round Shank Holder with Internal/External Coolant Hardinge offers HDB-­‐6 bushings to fit this holder, as well as ER style extensions Reducing Bushings and Sleeves are located beginning on page 20

FG 0011944CO Adjustable Cutoff Static Tool Holder with External Coolant Note: Cutoff blade is not included – uses standard 26mm blade

FG 0011944RDN 1” Double Narrow Round Shank Holder Through Holes Hardinge offers HDB-­‐8, HDC-­‐8-­‐BMT bushings and sleeves to fit this holder Reducing Bushings and Sleeves are located beginning on page 20

FG 0011944RDH 1” AND 1-­‐1/2” Double Half Index Holder with Internal\External Coolant Note: Half station index tool holders are NOT interchangeable between the H and T Series Machines due to a difference in the across flat distance of the top plate. Hardinge offers HDB-­‐8, HDC-­‐8-­‐BMT, HDB-­‐12, HDC-­‐12-­‐VL and HDZ-­‐12-­‐VL bushings and sleeves to fit this holder Reducing Bushings and Sleeves are located beginning on page 20

FG 0011944SQDH 1” Double Half Index Square Shank with External Coolant Note: Half station index tool holders are NOT interchangeable between the H and T Series Machines due to a difference in the across flat distance of the top plate.

FG 0011944SYR 1” Single Round Shank Through Hole with Internal\External Coolant Hardinge offers HDB-­‐8, HDC-­‐8-­‐BMT bushings and sleeves to fit this holder Reducing Bushings and Sleeves are located beginning on page 20

No Actual Print at Time of Publishing FG 0011944SYRD 3/4” Double Round Shank with Internal\External Coolant Hardinge offers HDB-­‐6 bushings and ER extension holders to fit this holder Reducing Bushings and Sleeves are located beginning on page 20

FG 0011944TP 1” 90 ° Square Shank with External Coolant

End Working Live Tooling Attachments FG 0000144EW End Working Live Tool 90 Degree, ER25 External Coolant Ratio 1:1 8000 RPM FG 0000144EWI End Working Live Tool 90 Degree, ER25 Internal Coolant Ratio 1:1 8000 RPM Note: Internal coolant units cannot be run dry ER Collets for Live Tool Attachments start on page 24

Cross Working Live Tooling Attachments FG 0000144CW Cross Working Live Tool ER25 External Coolant 1:1 Ratio 8000 RPM FG 0000144CWI Cross Working Live Tool ER25 Internal Coolant 1:1 Ratio 8000 Note: Internal coolant units cannot be run dry ER Collets for Live Tool Attachments start on page 24

Double End Working Live Tooling Attachments CQ 0000144EWD Double End Working Live Tool 90 Degree ER25 Double Collet External Coolant, 8000 RPM ER Collets for Live Tool Attachments start on page 24

Angular Working Live Tooling Attachments FG 0000144AA Angle Adjustable Live Tool 90 Degree ER20 External Coolant 1:1 Ratio, 8000 RPM FG 0000144AAI Angle Adjustable Live Tool 90 Degree ER 20 Internal/External Coolant, 8000 RPM Note: Internal coolant units cannot be run dry. ER Collets for Live Tool Attachments start on page 24

Inch Fractional Tooling Catalog #C-1501 ' WR^tM^ 19

Inch Fractional Inch Fractional Dimensions Tooling Catalog #C-1501 * WR^tM^ 20

www \^y/lo/? HARDI NGE.com Tooling Catalog # C-1501 H A^RPQ'uNp G E 21

HDC-Style Slotted Bushings . <, Tooling Catalog # C-1501 GROUP" 22

}] HDZ-Style Slotted Bushings — Preset HDZ-Style Solid Bushings feature one or two longitudinal slots, depending on the size of the bcre. The dot allows the set screws from the tool holoer to locate directly on the body of the tool. The bushing has a flange with t»vo set screws 90° apart The tool can be put in the bushing and set to a specific dimension from the locating shoulder and locked in place. The HDZIO bushing has a I \A* or a 32nm OD. The HDZ12 bushing has a VAm or a 40mn OD. Both bushings are available m metric or inch ODs anchor IDs. Tooling Catalog #C-1501 * WR^tM^ 23

ER8 through ER40 Collets — Inch , t/ £ Collet Dimensions ER16 through ER40 Collets — Inch Part Number Part Number Part Number Part Number ER Series collets have enough flex to hold a large range of tool shanks, el initiating the need for separate collet: for each tool. Refer to page 12 for concentricity specif cations. (ER-series collets are interchangeable with DR- and ESX-type collets) Special Accuracy Sets Part Number Tooling Catalog # C-1501 * \^Po^NpG 24