Tool i ng, Attach merits TURNING MILLING GRINDING WORKHOLDING ROTARY

WHY CUSTOMERS CHOOSE HARDINGE WORKHOLDING • Over 125 years of Precision Workholding Manufacturing experience. We have the track record and experience to serve all of your Workholding needs. • Hardinge Workholding has over 25 product families to allow for one stop shopping on a large variety of spindle tooling products. • Our ecommerce website: www.ShopHardinge.com gives you 24/7 access to products, pricing, availability and technical information on all workholding products. EXPERTS With 125 years of manufacturing experience it is no coincidence that Hardinge has become the Workholding experts...

NOTE: Additional tooling available – See pages 4 and 5 Model Number Page Number 3/8" & 1/2" Turret Top Plate Tooling 1" Extension Tool Holder With Adjustable Shim 2" Extension Tool Holder With Adjustable Shim 3" Extension Tool Holder With Adjustable Shim 4" Extension Tool Holder With Adjustable Shim “Cut-Type” Diamond Knurling Tool “Cut-Type” Diamond Knurling Tool Cut-Off Tool Holder* Cut-Off Tool Holder Blades (1⁄16", 3⁄32" & 1⁄8" Blades)* 3 ⁄8" Square-Shank Hardinge-Belcar Cut-Off Tool and Inserts 1 ⁄2" Square-Shank Hardinge-Belcar Cut-Off Tool and Inserts 1 ⁄2" Square-Shank Hardinge-Belcar...

Model Number Page Number Adjustable Shim for Invertible Tool Holders CC36 10 Adjustable Shim for Invertible Tool Holders AHC36 10 3 ⁄4" Square Shank Bar Stock Puller C100 20 Left-Hand Drill and Shank Tool Holder (Single Bolt) CC19-5⁄8 11 Left-Hand Drill and Shank Tool Holder (Single Bolt) CC19-3⁄4 11 Right-Hand Drill and Shank Tool Holder (Single Bolt) CC21-5⁄8 11 Right-Hand Drill and Shank Tool Holder (Single Bolt) CC21-3⁄4 11 Right-Hand Drill and Shank Tool Holder (Single Bolt) 5⁄8" Bore AHC21 11 Drill and Shank Tool Holder (Two Bolt) 5⁄8" Bore C18 12 Drill and Shank Tool Holder (Two Bolt)...

Miscellaneous Tooling MISCELLANEOUS TURRET TOP PLATE TOOL HOLDERS AND ACCESSORIES Photo Key Number Description Model Number Page Number Single Tool Holder Double Tool Holder Triple Tool Holder Invertible Tool Holder (Single Block) Invertible Tool Holder (Double Block) Invertible Tool Holder (Triple Block) Quadruple Tool Holder Universal Tool Post Boring Tool Holder Boring Tool Adapter Knurling Tool (Square Shank) Multiple Tool Holder for Vertical Slide* Cut-Off Tool Holder for Vertical Slide* P3N Cut-Off Blade for Vertical Slide* Hardinge-Belcar Cut-Off Blade* and Inserts * Not used on Quest...

Interchangeable Turret Top Plates Hardinge® turning centers complimented with CHNC interchangeable turret top plates have consistently reduced setup time. A wide range of tooling is offered for use on the standard 8-station or optional 4-position gang-tooled turret top plates. The turret top plates are interchangeable, allowing an operator to remove a tooled top plate from a machine and replace it with another pre-tooled top plate to reduce machine setup time. The top plate is secured to the machine by four screws. The gang-tooled turret top plate is ideal for maximum flexibility when setting...

Extension Tool Holders & Cut-Type Knurling Tool Extension Tool Holder with Adjustable Shim The extension tool holder is generally used for turning operations, but can also be used for holding tools to back-face flanged work, or to cut off, knurl, groove, or thread a workpiece. The extension tool holder mounts directly into a T-slot of a turret top plate and uses 3⁄8" or 1⁄2" square shank tool bits for the respective top plate. Each holder features an adjustable wedge for adjusting the tool to center. Round shank tools can be held in these holders by using the AHC22 boring tool adapter. X M Z1...

Cut-Off Tool Holder & High Speed Steel Cut-Off Blades Cut-Off Tool Holder The cut-off holder mounts directly into an extension tool holder to perform cut-off operations from the turret. The cut-off holder comes supplied with a standard P1 1⁄16" (1.59mm) wide, high-speed, cutoff blade. Additional P2 and P3 blades are available in thicknesses of 3⁄32" (2.38mm) or 1⁄8" (3.18mm), respectively. Cutting from the turret has proven to be easier for holding length dimensions and for controlling the feed rate. Note: Not used on Quest CHNC models Y Cut-Off Blades The cut-off blade is for cutting or parting...

Hardinge-Belcar Cut-Off Tool & Insert Square Shank Hardinge-Belcar Cut-Off Tool The square shank Hardinge-Belcar cut-off tool is used to perform cut-off or grooving operations. The holder mounts into a square shank tool holder. A light grip is required to place the insert into the holder. The pressure of the first cut seats the insert and holds it tightly in the holder. The insert is removed from the holder using an extractor tool that is supplied as standard. The insert design causes chips to roll inward and form into flowing coils during the cutting operation. This design allows faster feed...

Extension Tool Holders Left-Hand and Right-Hand Extension Tool Holders – 3⁄8" Top Plate The extension holder is used to help balance the tool length in a turret setup and give additional support for 3⁄8" left-hand and right-hand square shank tool bits that overhang the turret. They can be used for facing, turning, boring, chamfering, or threading operations. The D111 AHC14L extension holder mounts directly into a machine turret top plate T-slot. AH 0011625 L Right-Hand and Left-Hand Extension Tool Holders – 1⁄2" Top Plate The extension holder is used to help balance the tool length in a turret...

Invertible Extension Holders & Adjustable Shim Left-Hand and Right-Hand Invertible Extension Tool Holders – 3⁄8" & 1⁄2" Top Plate The invertible tool holder is used to mount a 3⁄8" or 1⁄2" square shank tool for cutting on the rear or front of the workpiece. The holder also helps balance the tool length in a turret setup and give additional support for tools that overhang the turret. The holder mounts into the T-slot of a machine turret top plate. If the cutting tool is to be mounted D188 for cutting on the rear of the workpiece, the tool is inverted and shimmed to place the cutting edge AHC29...