1. Catalogs
  2. Hardcast
  3. PROJECT PROFILE

PROJECT PROFILE

PROJECT PROFILE

Product catalog summary
Project Overview: The document discusses a project undertaken by GC Industrial Services to clean and deodorize a smoke-damaged condominium unit. The condo, built in the 1970s, suffered from intense cigarette odors and nicotine damage.
Challenges: The primary challenge was the persistent smoke odor and discoloration absorbed into the walls and woodwork, which can linger for months.
Solution: The solution involved a multi-step cleaning process:
  • Removal and disposal of textile items such as curtains and blinds.
  • Washing the entire unit to remove nicotine stains.
  • Application of Hardcast Smoke & Soot coating as an odor barrier primer on all surfaces.
  • Application of a matte latex paint top-coat.
  • Cleaning of carpets, air ducts, furnace, and air conditioning coils.
  • Completion of a three-day ozone treatment to eliminate any remaining odors.
Results: The use of Hardcast Smoke & Soot coating resulted in a 90% reduction in odor immediately after application. The project was completed in February, and no odors were present even during the high heat and humidity of the summer months.
Conclusion: Hardcast Smoke & Soot proved to be an effective solution for smoke odor removal in heavily damaged properties, as endorsed by Robert Rizen, VP of GC Industrial Services.
See more

Catalog excerpts

PROJECT PROFILE-1

PROJECT PROFILEA SMOKIN' SOLUTIONProblem: Smoke Damaged Condominium Unit Solution: Hardcast Smoke & Soot™ Applicator: GC Industrial Services “Hardcast Smoke & Soot has been in my duct cleaning/coating toolbox and will now be part of our structure deodorization protocol.” —Robert Rizen VP of GC Industrial Services hafrdcast SEALANTS & INSULATION ADHESIVES One of the biggest difficulties in preparing a condo for resale is cleaning the lingering odors. Smoke damage, in particular, is especially difficult due to the discoloration and absorption into walls and woodwork. Those odors may often stay present for months after the previous owners have left. GC Industrial Services, a specialized cleaning contractor with expertise in HVAC cleaning, water/fire damage and mold remediating, was contracted to clean a heavily smoke damaged unit. Built in the 1970s, The condo was a two-story, 1200 square foot condo with attached units beside and below. Intense cigarette odors and visible signs of nicotine damage throughout the condo demanded attention. Robert Rizen, the VP of GC Industrial Services, said, “After inspecting, I knew we would have to treat this like a fire damage cleanup project. Our plan was to clean, smoke seal (paint with a stain/odor blocking primer) and, possibly, ozone the property.” GC first removed and disposed of all textile items - curtains, blinds, and shades. They washed the entire unit to clean the nicotine stains. A heavy smoke smell remained after this step was completed, so Hardcast Smoke & Soot coating was utilized as an odor barrier primer. The product was brushed and roller-applied to all walls, ceilings, trim, doors, and kitchen cabinets. Two days after priming was completed, Rizen stated, “There was about a 90% reduction in the smell. I’ve used every kind of primer for odor blocking and this one works.” After priming with Hardcast Smoke & Soot, a matte latex paint top-coat was applied and the carpets, air ducts, furnace, and air conditioning coils were cleaned. Finally, a three day ozone treatment was completed to remove any latent odors. The project was completed in February and months later, even in the high heat and humidity of the summer season, there are no offending odors present in the condo. USA: 900 Hensley Lane, Wylie, TX 75098 • (877) 495-4822 Canada: 205 Brunswick Boulevard, Suite 300, Pointe-Claire, QC H9R 1A5 • (800) 544-5535 www.hardcast.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.