Booth-Tack™
1Pages

DUCT SEALANTS & INSULATION ADHESIVES Contributes to LEED” Credit Requirements Booth-Tack™ Quick-Tack, High-Yield Water-Based Insulation Adhesive Booth-Tack is a quick-tack, antimicrobial, nonflammable, water-based insulation adhesive engineered for spray booth applications. Booth-Tack is used in situations when duct insulation is promptly secured by an insulation fastener or the duct section is stored horizontally until the adhesive is dry. Booth-Tack offers high strength, low viscosity, great coverage and low suspended solids. APPLICATION Temperature PART NUMBERS 308585 1 5-Gallon Pail (Black) TECHNICAL DATA Color Consistency Base Solvent Weight per Gallon Solids Content Viscosity Coverage Initial Bonding Time Dry Time Service Temperature Surface Burning Water Resistance Mildew Resistance VOC Packaging Freeze/Thaw Stability Gray (wet), Black (dry) Low-viscosity liquid Synthetic latex Water 10.0 lbs (+/- 0.2) 53% (+/-2) 8,500-9,500 cps Up to 530 sq ft/gal (sprayed) 10 minutes* (5 mils @ RT) 20 minutes* (5 mils @ RT) -20°F to 200°F (-28.8°C to 93.3°C) Flame spread 0, smoke developed 0 (when tested in accordance with ASTM E84) Good Mold and mildew resistant, contains antimicrobial components 72 g/l (less water) 5-gal pail, 50-gal drum Passed 5 cycles 35°F to 110°F (1.7°C to 44°C) For use in spray booth operations or specific areas. Booth-Tack may be spray-, brush- or roller-applied to secure insulation to the substrate. Apply according to SMACNA specifications and local codes. Surface must be dry and free of dirt, oil and grease. UN-TACK™ or Solvent (Use safe handling practices) Shelf Life One year (unopened) Flammability Non-flammable UNDERWRITERS LABORATORIES, INC.® CLASSIFIED ADHESIVE Surface Burning Characteristics 294U 'Applied to inorganic reinforced cement board 'Tested as applied in two 3" (76.2 mm)-wide strips 8" (203.2 mm) on center at a coverage of 530 sq ft/gal (13 sq M/L). Flash point of finished adhesive, closed cup: no flash to boiling. PRECAUTIONS Inspect all winter shipments upon arrival. Apply when temperatures will not fall below freezing. Do not apply this product in weather-exposed areas or where temperatures will exceed 160°F. Keep out of the reach of children. Review Material Safety Data Sheet for safety information prior to use. SPECIFICATION/STANDARDS COMPLIANCE Property Method Duct Thermal Insulation ASTM C916 VOC Limitation SCAQMD Rule 1168 City of Los Angeles Approval RR #8069 Surface Burning Characteristics UL 723 For Industrial Professional Use Only. Results Pass Pass Pass Pass USA: 900 Hensley Lane, Wylie, TX 75098 • (877) 495-4822 Canada: 2100 Remembrance Road, Lachine, QC H8S 1X3 • (800) 544-5535 www.carlislehvac.com