Specialized in Electrical Power Test and Measurement Instruments since 1999 RELAYSTAR-7000 Universal Protection Relay Test System ■ Both conventional protection relays and IEC 61850-based protection devices & MU can be tested ■ Embedded industrial PC with 9.7’’ TFT LCD screen ■ Both local test and PC remote test available ■ In-built monitoring and recording ■ Four time synchronization modes: in-built GPS, IRIG-B Descriptions The RELAYSTAR-7000 is versatile solution for testing all generations and types of protection relays, including IEC 61850-based protection devices and Merging Unit. The RELAYSTAR-7000 can output 6-phase current and 6-phase voltage, which ensures the applications requiring the highest versatility, amplitude and power. It also can simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3. The RELAYSTAR-7000 can either be operated by embedded industrial PC with 9.7’’ TFT LCD screen or by test software running on a PC. Type Test Report

Technical Data General Current and Voltage Outputs Setting Binary Inputs Number potential-free contact or idle contact Type (automatic identification) Power Threshold characteristics Binary Outputs idle contact Break capacity In-built Monitoring and Recording currents and voltage outputs analog outputs, binary inputs/outputs status real time monitoring, no external wiring is required Recording unlimited (until the internal memory is full) length Power Supply resolution: 0.001Hz customized (AC 220V/230V/110V/120V±10%, 1Nominal input voltage Generators Phase Rated current superposition order: 2~24...