Overview: The document provides technical reference data related to servo motor models, specifically for AC servo motors ranging from 1kW to 5kW. It includes model series, motor types, ratios, and key dimensions relevant for installation and compatibility.

1. Series and Model Identification

The document lists several series and models identified by codes such as HRTK, SV1, SV2, SV3, and SV4. These codes correspond to different servo motor types and configurations.

2. Motor Specifications and Ratios

• SV1 Series: Servo motor with 22 PCD (Pitch Circle Diameter) of 145 mm, M8 mounting suitable for 1kW to 5kW AC servo motors.
• SV2 Series: Servo motor with 24 PCD of 145 mm, M8 mounting.
• SV3 Series: Servo motor with 35 PCD of 200 mm, M12 mounting.
• SV4 Series: Servo motor with 40 PCD of 165 mm, M10 mounting.

3. Dimensional Data and Through Depths

The document provides various through-depth measurements (L1, L2) for the HRTK 450 model, with values ranging from 30 mm up to 100 mm for L1 and 150 mm up to 500 mm for L2. These dimensions are critical for ensuring proper fit and installation.

Additional numeric values such as 1010, 130, 200, 280, 450, 1000, 5000, 29600, 750, 175, 6300, 30000, 0.04, and 0.02 appear to represent technical parameters like torque, speed, or other motor characteristics, though the document does not explicitly define each.

4. Notes and Recommendations

The data is provided for reference only. Final technical parameters and dimensions will be supplied based on customer-specific requirements.

5. Contact and Reference

For further information, the document references the website www.hansmat.com.

Critical Information: Ensure to verify all dimensions and technical parameters with the customer’s specifications before finalizing motor selection or installation.