Overview

The document provides reference data related to various motor types, models, and configurations, primarily focusing on servo and stepper motors suitable for different power ranges and mechanical setups. The data is intended for reference only, with final technical parameters and dimensions to be provided based on customer specifications.

Motor Types and Models

• Servo Motors (SV Series): Designed for 750 to 1500W AC servo motors.
• Stepper Motors (ST Series): Various models with different bolt circle diameters (PCD) and mounting screw sizes, suitable for 86-110 stepper motors.

Servo Motor Models

• SV1: Servo motor with 19 PCD 90, M5 screws.
• SV2: Servo motor with 19 PCD 90, M6 screws.
• SV3: Servo motor with 22 PCD 145, M8 screws.

Stepper Motor Models

• ST1: Stepper motor with 8 PCD 66.67, M4 screws.
• ST2: Stepper motor with 12.7 PCD 98.4, M5 screws.
• ST3: Stepper motor with 14 PCD 98.4, M5 screws (60).
• ST4: Stepper motor with 14 PCD 98.4, M5 screws (73).
• ST5: Stepper motor with 14 PCD 98.4, M6 screws (73).
• ST6: Stepper motor with 19 PCD 100, M6 screws.

Mechanical Configurations and Options

• Right Angle Options: RL (Standard), RY (Right Direction), RZ (Left Direction).
• Coaxial Reducer: JS model with sizes 10 and 18.

Technical Notes

• All data is for reference only.
• Final technical parameters and dimensions will be provided based on customer data.
• Various through-hole depths and dimensions are indicated but not fully detailed in the document.

Additional Information

Website references are provided (www.hansmat.com) for further details.

Summary of Critical Points

• Motor selection depends on power requirements (750-1500W for servo motors).
• Multiple mounting and mechanical configurations are available to suit different installation needs.
• Customer-specific data is essential for finalizing technical parameters and dimensions.