Overview

The document provides technical reference data for various models of servo and stepper motors, including specifications related to mounting dimensions, motor types, and suitability for different power ranges of AC servo motors and stepper motors.

Motor Types and Specifications

• Servo Motors (SV Series): Multiple models are listed with details on Pitch Circle Diameter (PCD) and mounting screw sizes (M4, M5, M6, M8, M12). Models include SV1, SV2, SV3, SV4, and SV5 with PCDs ranging from 14 to 35 and screw sizes from M4 to M12.
• Stepper Motors (ST Series): Models ST1 and ST2 are specified with PCDs of 14 and 19 (up to 132) and mounting screws from M5 to M8.

Mounting Dimensions and Ratios

The document lists various ratios and mounting dimensions (L1 and L2) for different motor models, with values such as 20, 25, 35, 50, 100, 200, 250, 350, 500, and 680. These dimensions correspond to the mechanical interface sizes for motor installation.

Power Suitability

• Servo motors SV1 and SV2 are suitable for AC servo motors in the power range of approximately 750W to 1500W.
• Stepper motors ST1 and ST2 are suitable for stepper motors in the range of 86W to 130W.
• Higher power servo motors (SV1 to SV5) are suitable for AC servo motors ranging from 1kW to 3kW.

Additional Notes

The data provided is for reference only. Final technical parameters and dimensions will be provided based on customer-specific data. The document references the website www.hansmat.com for further information.

Summary of Critical Information

• Motor mounting PCD and screw sizes are critical for compatibility.
• Power ratings guide the selection of motor models for specific applications.
• Dimension ratios (L1, L2) must be matched to motor and application requirements.
• Customer data is essential for finalizing technical specifications.