Overview: The document provides reference data for various models of servo and stepper motors, focusing on specifications such as bolt circle diameter (PCD), thread size (M), suitable power ranges, and applicable motor types. It includes multiple series and models with corresponding technical parameters and mounting dimensions.

1. Motor Types and Models

• Servo Motors (SV series): Models SV1 to SV5 with varying PCD and thread sizes, designed for different power ranges.
• Stepper Motors (ST series): Models ST1 and ST2 with specified PCD and thread sizes, suitable for stepper motors in defined power ranges.

2. Specifications and Parameters

• Bolt Circle Diameter (PCD): Ranges from 14 mm to 35 mm for smaller motors, up to 200 mm for larger servo motors.
• Thread Sizes (M): Vary from M4 to M12 depending on the motor model and size.
• Power Suitability: Servo motors are suitable for power ranges from 750W to 3kW AC servo motors; stepper motors cover ranges from 86W to 130W.
• Series and Model Ratios: Various ratios and sizes are listed, such as L1 and L2 series with dimensions like 20, 25, 35, 50, 100, 200, 250, 350, 500, etc.

3. Mounting and Dimensional Data

• Mounting hole depths and through-hole depths are indicated but not fully detailed; these depend on customer-provided data.
• Dimensions such as bolt circle diameters and thread sizes are critical for proper motor mounting and compatibility.

4. Notes and Recommendations

• The data provided is for reference only.
• Final technical parameters and dimensions will be provided based on customer-specific requirements.
• Users should consult the manufacturer’s website (www.hansmat.com) for detailed and updated information.

5. Summary of Key Data Points

Note: The above table summarizes key motor types, their mounting dimensions, and power suitability ranges.