Overview: The document provides reference data related to various motor types, models, and configurations, primarily focusing on servo and stepper motors suitable for different power ranges and mechanical setups. It emphasizes that the data is for reference only and that specific technical parameters and dimensions will be provided based on customer requirements.

1. Motor Types and Models

• Servo Motors (SV Series): Designed for 750 to 1500W AC servo motors.
• SV1: Servo motor with 19 PCD 90, M5 mounting.
• SV2: Servo motor with 19 PCD 90, M6 mounting.
• SV3: Servo motor with 22 PCD 145, M8 mounting.
• Stepper Motors (ST Series): Suitable for 86-110 stepper motors with various mounting configurations.
• ST1: Stepper motor with 8 PCD 66.67, M4 mounting.
• ST2: Stepper motor with 12.7 PCD 98.4, M5 mounting.
• ST3: Stepper motor with 14 PCD 98.4, M5 mounting (60).
• ST4: Stepper motor with 14 PCD 98.4, M5 mounting (73).
• ST5: Stepper motor with 14 PCD 98.4, M6 mounting (73).
• ST6: Stepper motor with 19 PCD 100, M6 mounting.

2. Mounting and Orientation Options

• Right Angle Configurations:
• RL: Right Angle - Standard
• RY: Right Angle - Right Direction
• RZ: Right Angle - Left Direction
• Reducer Type: JS: Coaxial Reducer 1018

3. Mechanical Parameters

• Various Pitch Circle Diameters (PCD) and mounting screw sizes (M4, M5, M6, M8) are specified for different motor models.
• Through hole depths and dimensions are referenced but not explicitly detailed; these will be provided based on customer data.

4. Important Notes and Recommendations

• The data presented is for reference only.
• Final technical parameters and dimensions will be customized according to customer-provided data.
• Website references (www.hansmat.com) are included for further information.

5. Summary of Key Parameters

Conclusion: This document serves as a reference guide for selecting motor types and configurations based on customer requirements. It outlines the available motor models, mounting options, and key mechanical parameters, while emphasizing that detailed specifications will be tailored to the customer's data.