HS-160S Series Velocity Sensor Braided Cable, Low Profile, Velocity Accelerometer Typical Applications Proven use in vibration monitoring for offline applications using commercially available data collectors and online monitoring systems in the fields of Building Services, Civil Engineering, Paper and Pulp, Mining, Metals Manufacture, Utilities, Automotive, Water and Waste Treatment, Pharmaceutical, Aerospace, etc. Protecting... Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more. Technical Performance Mounted Base Resonance Sensitivity Frequency Response Isolation Measurement Range 22 kHz (nominal) 4 mV/mm/s ±10% Nominal 80 Hz at 22 ºC 2 Hz to 6 kHz ±3 dB Base isolated 1000 mm/s pk Transverse Sensitivity Electrical Noise Current Range Bias Voltage Settling Time Output Impedance Case Isolation 0.1 mg max 0.5 mA to 8 mA 10 - 12 Volts DC 2 seconds 200 Ohms max. >10 8 Ohms at 500 Volts Environmental Operating Temperature Range Sealing Maximum Shock Emissions Immunity Mechanical Case Material Sensing Element/Construction Mounting Torque Mounting Bolt Provided Weight Maximum Cable Length Standard Cable Length Mounting Threads Options Stainless Steel PZT/Compression 8 Nm M6 x 33 mm long, ¼ - 28 UNF x 33 mm long or M8 x 33 mm long 170 gms (nom) 1000 metres 5 metres See 'How to order' table Connector, temperature output, various connector assemblies, other sensitivities

HS-160S Series Velocity Sensor Typical Connection Current diode Frequency Response Mounting of sensorto achieve good repeatable readings. Vibration sensor should be firmly fixed to a flat surface (spot face surface maybe needed to be produced and cable anchorec Extra Options