Catalogs >
Hansford Sensors >
HS-130 Series - Compact

HS-130 Series - Compact
2Pages

Catalog excerpts

HS-130 Sries Vibration Sensor Compact, Flame Retardant Cable, AC General Purpose Accelerometer Typical Applications J Proven use in vibration monitoring for offline applications using commercially available data collectors and online monitoring Systems in the fields of Building Services, Civil Engineering, Paper and Pulp, Mining, Metals Manufacture, Utilities, Automotive, Water and Waste Treatment, Pharmaceutical, Aerospace, etc. Protecting... Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more. Technical Performance Mounted Base Rsonance Sensitivity Frequency Response Isolation Measurement Range Transverse Sensitivity 28 kHz (nominal) 100 mV/g ±10% Nominal 80 Hz at 22 °C 2 Hz to16kHz ±5% 0.8 Hz to 20 kHz ±3 dB Base isolated ±80 g Less than 5% Electrical Electrical Noise Current Range Bias Voltage Settling Time Output Imp驩dance Case Isolation 0.1 mg max 0.5 mA to 8 mA 10-12 Volts DC 2 seconds 200 Ohms max. >108Ohms at 500 Volts Environmental Operating Temprature Range Sealing Maximum Shock Emissions Immunity -55 to 100 °C IP65 5000 g EN61000-6-4:2001 EN61000-6-2:1999 Mechanical Case Material Sensing Elment/Construction Mounting Torque Weight Maximum Cable length Standard Cable length Mounting Threads Options Stainless Steel PZT/Compression 8 Nm 30 gms (nom) 1000 m驨tres 5 mtres See 'How to order' table Connector, cable length, various mounts, other sensitivities H Hansford Sensors Excellence in Vibration Monitoring Tel: +44(0)845 680 1957 Fax: +44(0)845 680 1958 Email: sales@hansfordsensors.com Web: www.hansfordsensors.com

Open the catalog to page 1

HS-130 Sries Vibration Sensor Dimensions 0.5-8.0mA Current diode Typical Connection 015- Screen to case Ho +18 to 30 Volts 2.2uF White ... +ve Sensor Input I Volts out A.C. Readout / Monitoring System DC Bias 470K Black ... OV Frequency Response Mounting of sensor to achieve good repeatable readings. Vibration sensor should be firmly fixed to a flat surface (spot face surface may be needed to be produced and cable anchored to sensor body.) ta 50 "2 40 S) 30 5 20 (TJ 10 l 0 g -10 > -20 « -30 S -40 <n-50 i I / 10 100 1000 10,000 100,000 Frequency Hz How to order HS - Product Prefix Cable...

Open the catalog to page 2