Catalogs >
Hansford Sensors >
HS-105I Series

HS-105I Series
3Pages

Catalog excerpts

HS-105I Series Vibration Sensor Intrinsically Safe, High Temperature, 100mv/g Industrial Accelerometer Typical Applications For offline applications using commercially available intrinsically safe data collectors and online monitoring systems in the fields of Offshore, Petrochemical, Gas. Protecting... Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Process Equipment and many more. Technical Performance Isolation Measurement Range 22 kHz (nominal) 100 mV/g ±10% Nominal 80 Hz at 22 ºC 2 Hz to 10 kHz ±5 % 0.8 Hz to 15 kHz ±3 dB Base isolated ±80 g Transverse Sensitivity Electrical Noise Current Range Bias Voltage Settling Time Output Impedance Case Isolation 0.1 mg max 0.5 mA to 8 mA 10 - 12 Volts DC 2 seconds 200 Ohms max. 8 >10 Ohms at 500 Volts Mounted Base Resonance Sensitivity Frequency Response Environmental Certified Temperature Range Sensor Temperature Range Sealing Maximum Shock Emissions Immunity Ex ia IIC T2 (-20°C < Ta < +250°C) Accelerometer Ex ia IIC T4 (-20ºC < Ta < +80ºC) Charge Amplifier -20 to 250°C IP65 5000 g EN61000-6-4:2001 EN61000-6-2:1999 Mechanical Case Material Sensing Element/Construction Mounting Torque Weight Maximum Cable length Mounting Threads Options Stainless Steel PZT/Compression 8 Nm 110 gms (nom) 10 metres between sensor and charge amplifier See 'How to order' table Cable length, various mounts, other sensitivities

Open the catalog to page 1

HS-105I Series Vibration Sensor Intrinsically Safe, 100mV/g Industrial Accelerometer Intrinsically Safe Requirements Maximum Cable Length Certificate details: Group II Accelerometer Certificate details: Group II Charge Amplifier Terminal Parameters Units Will Pass A 500V Isolation Test 1 x Pepperl + Fuchs Galvanic Isolator KFD2-VR4-Ex1.26 (BAS02ATEX7206) or equivalent 1 x MTL Zener Barrier MTL7728 (BAS01ATEX7217) or Pepperl + Fuchs Zener Barrier Z728 (BAS01ATEX7005) or equivalent Special conditions of safe use for Group II. The free end of the cable on the integral cable version of the...

Open the catalog to page 2

HS-1051 Series Vibration Sensor area apparatus Frequency Response Product Series Other Outputs PTFE Cable Mounting Threads Other Mounting Threads Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes. We reserve the right to alter the specification of this product without prior notice. Hansford Sensors Excellence in Vibration Monitoring Tel: +44(0) 845 680 1957 Email: sales@hansfordsensors.com

Open the catalog to page 3