*mydirectindustry

HS-100 Series

Product catalog summary

HS-100 Series Vibration Sensor Overview
This document provides technical specifications and application details for the HS-100 Series Vibration Sensor, a 2 Pin MS Connector, 100mV/g Industrial Accelerometer.

Technical Performance

Operating Temperature Range: -55 to 140 ºC
Sealing: IP67
Maximum Shock: 5000 g
Emissions: EN61000-6-4:2001
Immunity: EN61000-6-2:1999

Mechanical Specifications

Case Material: Stainless Steel
Sensing Element/Construction: PZT/Compression
Mounting Torque: 8 Nm
Weight: 110 gms (nominal)
Maximum Cable Length: 1000 metres
Mating Connector: HS-AA004
Mounting Threads: See 'How to order' table
Options: Integral cable, filters, temperature output, various connector assemblies, other sensitivities

Electrical Specifications

Electrical Noise: 0.1 mg max
Current Range: 0.5 mA to 8 mA
Bias Voltage: 10 - 12 Volts DC
Settling Time: 2 seconds
Output Impedance: 200 Ohms max.
Case Isolation: >10 Ohms at 500 Volts

Performance Characteristics

Mounted Base Resonance: 22 kHz (nominal)
Sensitivity: 100 mV/g ±10% Nominal 80 Hz at 22 ºC
Frequency Response: 2 Hz to 10 kHz ±5 %, 0.8 Hz to 15 kHz ±3 dB
Isolation: Base isolated
Measurement Range: ±80 g
Transverse Sensitivity: Less than 5%

Applications
The sensor is proven for use in vibration monitoring for offline applications using commercially available data collectors and online monitoring systems. It is applicable in various fields such as Building Services, Civil Engineering, Paper and Pulp, Mining, Metals Manufacture, Utilities, Automotive, Water and Waste Treatment, Pharmaceutical, Aerospace, etc. It is used to protect equipment like Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment, and more.

Installation and Ordering
The sensor should be firmly fixed to a flat surface to achieve good repeatable readings. Contact the sales office for information on sensor accessories and multichannel switch boxes. Specifications are subject to change without notice.

Catalog excerpts

HS-100 Series Vibration Sensor 2 Pin MS Connector, 100mV/g Industrial Accelerometer Typical Applications Proven use in vibration monitoring for offline applications using commercially available data collectors and online monitoring systems in the fields of Building Services, Civil Engineering, Paper and Pulp, Mining, Metals Manufacture, Utilities, Automotive, Water and Waste Treatment, Pharmaceutical, Aerospace, etc. Protecting... Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more. Technical Performance Isolation Measurement Range 22 kHz (nominal) 100 mV/g ±10% Nominal 80 Hz at 22 ºC 2 Hz to 10 kHz ±5 % 0.8 Hz to 15 kHz ±3 dB Base isolated ±80 g Transverse Sensitivity Electrical Noise Current Range Bias Voltage Settling Time Output Impedance Case Isolation 0.1 mg max 0.5 mA to 8 mA 10 - 12 Volts DC 2 seconds 200 Ohms max. >10 8 Ohms at 500 Volts Mounted Base Resonance Sensitivity Frequency Response Environmental Operating Temperature Range Sealing Maximum Shock Emissions Immunity Mechanical Case Material Sensing Element/Construction Mounting Torque Weight Maximum Cable length Mating Connector Mounting Threads Options Stainless Steel PZT/Compression 8 Nm 110 gms (nom) 1000 metres HS -AA004 See 'How to order' table Integral cable, filters, temperature output, various connector assemblies, other sensitivities

Open the catalog to page 1