• Operating Temperature Range: -55 to 140 ºC
• Sealing: IP65
• Maximum Shock: 5000 g
• Emissions: EN61000-6-4:2001
• Immunity: EN61000-6-2:1999
• Case Material: Stainless Steel
• Sensing Element/Construction: PZT/Compression
• Mounting Torque: 8 Nm
• Weight: 110 gms (nominal)
• Maximum Cable Length: 1000 metres
• Standard Cable Length: 5 metres
• Mounting Threads: See 'How to order' table
• Options: Intrinsically safe, connector, cable length, various mounts, other sensitivities

• Mounted Base Resonance: 22 kHz (nominal)
• Sensitivity: 100 mV/g ±10% Nominal 80 Hz at 22 ºC
• Frequency Response: 2 Hz to 10 kHz ±5 %, 0.8 Hz to 15 kHz ±3 dB
• Isolation: Base isolated
• Measurement Range: ±80 g
• Transverse Sensitivity: Less than 5%

• Electrical Noise: 0.1 mg max
• Current Range: 0.5 mA to 8 mA
• Bias Voltage: 10 - 12 Volts DC
• Settling Time: 2 seconds
• Output Impedance: 200 Ohms max.
• Case Isolation: >10 Ohms at 500 Volts

The HS-100 Series Vibration Sensor is proven for use in vibration monitoring for offline applications using commercially available data collectors and online monitoring systems. It is applicable in fields such as Building Services, Civil Engineering, Paper and Pulp, Mining, Metals Manufacture, Utilities, Automotive, Water and Waste Treatment, Pharmaceutical, Aerospace, etc. It is designed to protect equipment like Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment, and more.

The vibration sensor should be firmly fixed to a flat surface, and a spot face surface may need to be produced. The cable should be anchored to the sensor body to achieve good repeatable readings.

For information on sensor accessories (mounting studs, etc.) and multichannel switch boxes, please contact the Sales Office. Specifications are subject to change without prior notice.