*mydirectindustry

Paramax 9000

Product catalog summary

Introduction
The PARAMAX 9000 Series Industrial Gearbox by Sumitomo Heavy Industries is designed for power transmission and control applications. This document outlines its specifications, construction, and selection guidelines.

Specifications
The gearbox is available in 26 sizes, offering output torques from 2.6 to 552 kNm. It features a high thermal capacity due to a fan cooling system and is designed for low noise operation with optimized gear tooth profiles.

Construction and Design
The gearbox supports multiple mounting orientations and uses a 25-degree pressure angle for enhanced tooth strength. It includes helical gears, taper roller bearings, and oil seals.

Selection and Nomenclature
The selection process involves determining the service factor, calculating transmission power, and checking thermal power. The nomenclature system details series, mounting, shaft position, and gear stages.

Technical Data
Lubrication methods vary with shaft orientation, and the gearbox is designed for indoor installation in well-ventilated areas. Ambient conditions such as temperature and humidity are specified.

Applications
The gearbox is suitable for applications requiring hollow shafts, drop bearing housings, and various mounting configurations, supporting both parallel and right-angle drive units.

Specifications and Thermal Ratings
Thermal ratings are 48kW without a fan and 120kW with a fan. Temperature correction factors are 0.70 without a fan and 0.73 with a fan.

Load and Ambient Conditions
Overhung load and ambient conditions are within acceptable limits, with an equivalent radial load of 10.6 kN and an allowable radial load of 29.4 kN.

Service Factor and Applications
Service factors are provided for various applications, including cranes and conveyors, based on operating hours and load type.

Reducer Selection
Tables provide information on reducer sizes, reduction ratios, and shaft speeds for different configurations.

Temperature Correction and Interpolation
Temperature correction factors are used when ambient temperature is outside the specified range. Interpolation is used for unlisted high-speed shaft speeds.

Procedures and Recommendations
Forced oil lubrication is required for continuous operation. Consult the manufacturer if high-speed shaft speed exceeds 1800 r/min.

Installation and Lubrication
Guidelines include using a rigid base and specific oil types based on ISO and AGMA standards.

Painting and Rust Proofing
Details on rust-proofing specifications and paint types are provided, with the standard color being Donau Blue.

Technical Data Overview
Specifications include moment of inertia, reduction ratios, and dimensions for various reducer sizes.

Torque Arm Specifications
Features of PARAMAX DRIVE units include compactness and ease of installation, with optional torque arms for shock loading.

Internal Backstop and Breathers
Details on internal backstop, washdown breather, anti-dust breather, and anti-humidity breather are provided for different environmental conditions.

Catalog excerpts

Worldwide Locations U.S.A Sumitomo Machinery Corporation of America (SMA) 4200 Holland Blvd. Chesapeake,VA 23323,U.S.A. TEL (1)757-485-3355 FAX (1)757-485-7490 Canada SM Cyclo of Canada, Ltd. (SMC) 1453 Cornwall Road,Oakville, Canada ON L6J 7T5 TEL (1)905-469-1050 FAX (1)905-469-1055 France SM-Cyclo France SAS (SMFR) 8 Avenue Christian Doppler, 77700 Serris, France TEL (33)164171717 FAX (33)164171718 Italy SM-Cyclo Italy Srl (SMIT) Via dell' Artigianato 23, 20010 Cornaredo (MI), Italy TEL (39)293-481101 FAX (39)293-481103 Singapore Sumitomo (SHI) Cyclo Drive Asia Paci c Pte. Ltd. (SCA) 15 Kwong Min Road, Singapore 628718 TEL (65)6591-7800 FAX (65)6863-4238 Philippines Sumitomo (SHI) Cyclo Drive Asia Paci c Pte. Ltd. (SMPH) C4 & C5 Bldg. Granville Industrial Complex Governor’s Drive, Bo. Bancal, Carmona, Cavite 4116 Philippines TEL (63)2-584-4921 FAX (63)2-584-4922 TEL (63)46-430-3591 TEL (63)46-482-0580 TEL (63)46-482-0581 Mexico SM Cyclo de Mexico, S.A. de C.V. (SMME) Av. Desarrollo 541, Col. Finsa, Guadalupe, Nuevo León, México, CP67132 TEL (52)81-8144-5130 FAX (52)81-8144-5130 Spain SM-Cyclo Iberia, S.L.U. C/Gran Via n° 63 bis planta primera, o cina 1B 48011 Bilbao - Vizcaya, Spain TEL (34)944-805389 Brazil Sumitomo Industrias Pesadas do Brasil Ltda. (SHIB) Rodovia do Acucar (SP-075) Km 26 Itu, Sao Paulo, Brasil TEL (55)11-4886-1000 FAX (55)11-4886-1000 United Kingdom SM-Cyclo UK Ltd. (SMUK) Unit 29, Bergen Way, Sutton Fields Industrial Estate, Kingston upon Hull, HU7 0YQ, East Yorkshire, United Kingdom TEL (44)1482-790340 FAX (44)1482-790321 Chile SM Cyclo de Chile, Ltda. (SMCH) San Pablo 3507, Quinta Normal, Santiago, Chile TEL (56)2-892-7000 FAX (56)2-892-7001 Turkey SM Cyclo Turkey Güç Aktar m Sis. Tic. Ltd. Sti. (SMTR) Büyükdere Çay rba Cd. Dede Yusuf Sk. No:11, 34453 Sar yer Istanbul, Turkey TEL (90)216-384-4482 FAX (90)216-384-4482 Malaysia SM-Cyclo of Malaysia Sdn. Bhd. (SMMA) No.7C, Jalan Anggerik Mokara 31/56, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor D.E., Malaysia TEL (60)3-51210455 FAX (60)3-51210578 China Sumitomo (SHI) Cyclo Drive China, Ltd. (SCT) 11F,SMEG Plaza, No.1386 Hongqiao Road, Changning District, Shanghai, China (P.C.200336) TEL (86)21-3462-7877 FAX (86)21-3462-7922 Indonesia PT. SM-Cyclo Indonesia (SMID) Cikarang Jalan Sungkai Blok F 25 No.09 K, Delta Silicon III, Lippo Cikarang, Bekasi, Indonesia TEL (62)21-2961-2100 FAX (62)21-2961-2211 Hong Kong SM-Cyclo of Hong Kong Co.,Ltd. (SMHK) Rm 1301, CEO Tower, 77 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong TEL (852)2460-1881 FAX (852)2460-1882 Thailand SM-Cyclo (Thailand) Co., Ltd. (SMTH) 195 Empire Tower, 21st Fl., Unit 2103-4, South Sathorn Rd., Yannawa Sathorn, Bangkok 10120, Thailand TEL (66)2-670-0998 FAX (66)2-670-0999 Guatemala SM Cyclo de Guatemala Ensambladora, Ltda. (SMGT) Parque Industrial Unisur, 0 Calle B 19-50 Zona 3, Bodega D-1 Delta Bárcenas en Villa Nueva, Guatemala TEL (502)6648-0500 FAX (502)6631-9171 Colombia SM Cyclo Colombia, S.A.S. Carrera 11, No.93A-53, Of ce 203, Bogotá, Colombia TEL (57)1-3000673 Germany Sumitomo (SHI) Cyclo Drive Germany GmbH (SCG) Cyclostraße 92, 85229 Markt Indersdorf, Germany TEL (49)8136-66-0 FAX (49)8136-5771 Korea Sumitomo (SHI) Cyclo Drive Korea, Ltd. (SCK) Royal Bldg. 9F Rm.913, 5 Danju-Dong, Chongro-Ku, Seoul, Korea 110-721 TEL (82)2-730-0151 FAX (82)2-730-0156 Taiwan Tatung SM-Cyclo Co., Ltd. (TSC) 22 Chungshan N. Road 3rd., Sec. Taipei, Taiwan 104, R.O.C. TEL (886)2-2595-7275 FAX (886)2-2595-5594 Austria Sumitomo (SHI) Cyclo Drive Germany GmbH (SCG) SCG Branch Austria Of ce Gruentalerstraße 30A, 4020 Linz, Austria TEL (43)732-330958 FAX (43)732-331978 Australia Sumitomo (SHI) Hansen Australia Pty. Ltd. (SHAU) 181 Power Street Glendenning NSW 2761, Australia TEL (61)2-9208-3000 FAX (61)2-9208-3050 India Sumi-Cyclo Drive India Pvt. Ltd. (SMIN) Survey No.130, Hissa No.02, Jeevan Nagar, Off MumbaiBangalore bypass, Tathawade, Pune-411 033, India TEL (91)20-6674-2900 FAX (91)20-6674-2901 Industrial Gearbox Headquarter ThinkPark Tower, 1-1 Osaki 2-chome, Shinagawa-ku, Tokyo 141-6025, Japan 9000 Series Industrial Gearbox Japan Sumitomo Heavy Industries, Ltd. ThinkPark Tower, 1-1 Osaki 2-chome, Shinagawa-ku, Tokyo 141-6025, Japan TEL (81)3-6737-2511 FAX (81)3-6866-5160 Belgium Belgium, Netherlands, Luxemburg Hansen Industrial Transmissions NV Leonardo da Vincilaan 1-3 2650 Edegem, Belgium TEL (32)3-450-12-11 Power Transmission & Controls Group Argentina SM Cyclo de Argentina S.A. (SMAR) Ing. Delpini, 2236Area de Promocion el Triangulo, Partido Malvinas Argentinas Grand Bourg, Buenos Aires, Argentina B1615KGB TEL (54)3327-45-4095 FAX (54)3327-45-4099 Vietnam SM-Cyclo (Vietnam) Co., Ltd. (SMVN) Factory 2B, Lot K1-2-5,Road No.: 2-3-5A, Le Minh Xuan Industrial Park, Binh Chanh Dist., HCMC, Vietnam. TEL (84)8-37-663-709 FAX (84)8-37-663-710

Open the catalog to page 1

Available Combination Introduction of Application Introduction of Applied Product Reducer Standard Speci cations Construction Drawing Nomenclature Selection Service Factor SF Selection Tables and Dimension Tables Right Angle Shaft Parallel Shaft Technical Data Lubricant and Installation Painting Speci cations and Rust Proof Standard Moment of Inertia Supplementary Dimension Drawing Supplementary Matters to Hollow Shaft Hollow Shaft Related Dimensions Cooling Fan Dimension Option Dimension

Open the catalog to page 2

Features JUST FIT SIZE 26 sizes variation for most accurate economical selection. Prepared full range 26 sizes variation. Fitness size selection available for every requested torque. Customer's wide design availability with most accurate economical selection. LARGER THERMAL CAPACITY Advanced thermal capacity by new designed fan cooling system. (Option) New designed fan and conducted air cowling gain larger thermal capacity. This system bene ts for severe situation like continuous operation, even if compact size. 87% higher thermal rating comparison with existing design New design fan and hood...

Open the catalog to page 3

All Hansen Industrial Transmissions catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list